[PATCH V2 1/2] regulator: tps51632: add register property for regmap

Subsystems: the rest, voltage and current regulator framework

STALE4965d

3 messages, 2 authors, 2012-12-27 · open the first message on its own page

[PATCH V2 1/2] regulator: tps51632: add register property for regmap

From: Laxman Dewangan <ldewangan@nvidia.com>
Date: 2012-12-25 15:06:16

All TPS51632 registers are not readable/writable and
non-volatiles.

Add property of the registers whether it is readable/writable
or volatile for regmap framework.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
- No code change.
- Rebase in linux-next 20121224

 drivers/regulator/tps51632-regulator.c |   41 ++++++++++++++++++++++++++++----
 1 files changed, 36 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
index ab21133..b96fb0e 100644
--- a/drivers/regulator/tps51632-regulator.c
+++ b/drivers/regulator/tps51632-regulator.c
@@ -205,18 +205,49 @@ skip_pwm_config:
 	return ret;
 }
 
-static bool rd_wr_reg(struct device *dev, unsigned int reg)
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
 {
-	if ((reg >= 0x8) && (reg <= 0x10))
+	switch (reg) {
+	case TPS51632_OFFSET_REG:
+	case TPS51632_FAULT_REG:
+	case TPS51632_IMON_REG:
+		return true;
+	default:
 		return false;
-	return true;
+	}
+}
+
+static bool is_read_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x08 ... 0x0F:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool is_write_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TPS51632_VOLTAGE_SELECT_REG:
+	case TPS51632_VOLTAGE_BASE_REG:
+	case TPS51632_VMAX_REG:
+	case TPS51632_DVFS_CONTROL_REG:
+	case TPS51632_POWER_STATE_REG:
+	case TPS51632_SLEW_REGS:
+		return true;
+	default:
+		return false;
+	}
 }
 
 static const struct regmap_config tps51632_regmap_config = {
 	.reg_bits		= 8,
 	.val_bits		= 8,
-	.writeable_reg		= rd_wr_reg,
-	.readable_reg		= rd_wr_reg,
+	.writeable_reg		= is_write_reg,
+	.readable_reg		= is_read_reg,
+	.volatile_reg		= is_volatile_reg,
 	.max_register		= TPS51632_MAX_REG - 1,
 	.cache_type		= REGCACHE_RBTREE,
 };
-- 
1.7.1.1

[PATCH V2 2/2] regulator: tps51632: add DT support

From: Laxman Dewangan <ldewangan@nvidia.com>
Date: 2012-12-25 15:06:28

Add DT support for the TI TPS51632. Add device binding document also.

Signed-off-by: Laxman Dewangan <redacted>
---
Changes from V1:
- Fix compilation error which was not cought in earlier patch.
- Rebased to linux-next 20121224

 .../bindings/regulator/tps51632-regulator.txt      |   27 +++++++++
 drivers/regulator/tps51632-regulator.c             |   59 ++++++++++++++++++++
 2 files changed, 86 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
new file mode 100644
index 0000000..2f7e44a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
@@ -0,0 +1,27 @@
+TPS51632 Voltage regulators
+
+Required properties:
+- compatible: Must be "ti,tps51632"
+- reg: I2C slave address
+
+Optional properties:
+- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.
+- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this
+	will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage
+	step is 10mV as per datasheet.
+
+Any property defined as part of the core regulator binding, defined in
+regulator.txt, can also be used.
+
+Example:
+
+	tps51632 {
+		compatible = "ti,tps51632";
+		reg =  <0x43>;
+		regulator-name = "tps51632-vout";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		ti,enable-pwm-dvfs;
+		ti,dvfs-step-20mV;
+	};
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
index b96fb0e..7560d07 100644
--- a/drivers/regulator/tps51632-regulator.c
+++ b/drivers/regulator/tps51632-regulator.c
@@ -28,10 +28,13 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/regulator/tps51632-regulator.h>
 #include <linux/slab.h>
 
@@ -252,6 +255,49 @@ static const struct regmap_config tps51632_regmap_config = {
 	.cache_type		= REGCACHE_RBTREE,
 };
 
+#if defined(CONFIG_OF)
+static const struct of_device_id tps51632_of_match[] = {
+	{ .compatible = "ti,tps51632",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, tps51632_of_match);
+
+static struct tps51632_regulator_platform_data *
+	of_get_tps51632_platform_data(struct device *dev)
+{
+	struct tps51632_regulator_platform_data *pdata;
+	struct device_node *np = dev->of_node;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "Memory alloc failed for platform data\n");
+		return NULL;
+	}
+
+	pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+	if (!pdata->reg_init_data) {
+		dev_err(dev, "Not able to get OF regulator init data\n");
+		return NULL;
+	}
+
+	pdata->enable_pwm_dvfs =
+			of_property_read_bool(np, "ti,enable-pwm-dvfs");
+	pdata->dvfs_step_20mV = of_property_read_bool(np, "ti,dvfs-step-20mV");
+
+	pdata->base_voltage_uV = pdata->reg_init_data->constraints.min_uV ? :
+					TPS51632_MIN_VOLATGE;
+	pdata->max_voltage_uV = pdata->reg_init_data->constraints.max_uV ? :
+					TPS51632_MAX_VOLATGE;
+	return pdata;
+}
+#else
+static struct tps51632_regulator_platform_data *
+	of_get_tps51632_platform_data(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int tps51632_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
@@ -261,7 +307,19 @@ static int tps51632_probe(struct i2c_client *client,
 	int ret;
 	struct regulator_config config = { };
 
+	if (client->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_device(of_match_ptr(tps51632_of_match),
+				&client->dev);
+		if (!match) {
+			dev_err(&client->dev, "Error: No device match found\n");
+			return -ENODEV;
+		}
+	}
+
 	pdata = client->dev.platform_data;
+	if (!pdata && client->dev.of_node)
+		pdata = of_get_tps51632_platform_data(&client->dev);
 	if (!pdata) {
 		dev_err(&client->dev, "No Platform data\n");
 		return -EINVAL;
@@ -350,6 +408,7 @@ static struct i2c_driver tps51632_i2c_driver = {
 	.driver = {
 		.name = "tps51632",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(tps51632_of_match),
 	},
 	.probe = tps51632_probe,
 	.remove = tps51632_remove,
-- 
1.7.1.1

Re: [PATCH V2 1/2] regulator: tps51632: add register property for regmap

From: Mark Brown <hidden>
Date: 2012-12-27 17:32:37

On Tue, Dec 25, 2012 at 08:35:59PM +0530, Laxman Dewangan wrote:
All TPS51632 registers are not readable/writable and
non-volatiles.
Applied both, thanks, but you might wish to consider...
+static bool is_read_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x08 ... 0x0F:
+		return false;
+	default:
+		return true;
+	}
+}
...using the new table based stuff for the access checks, at least this
one seems to map on nicely.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help