Thread (25 messages) 25 messages, 4 authors, 2013-01-14

Re: [PATCH v5 1/4] ARM: EXYNOS: Update & move usb-phy types to generic include layer

From: Vivek Gautam <hidden>
Date: 2012-12-19 05:46:36
Also in: linux-samsung-soc, lkml

CC: Doug Anderson.


On Tue, Dec 18, 2012 at 8:13 PM, Vivek Gautam [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Updating the names of usb-phy types to more generic names:
USB_PHY_TYPE_DEIVCE & USB_PHY_TYPE_HOST; and further update
its dependencies.

Signed-off-by: Praveen Paneri <redacted>
Signed-off-by: Vivek Gautam <redacted>
---
 drivers/usb/host/ehci-s5p.c         |    9 +++++----
 drivers/usb/host/ohci-exynos.c      |    9 +++++----
 include/linux/usb/samsung_usb_phy.h |   16 ++++++++++++++++
 3 files changed, 26 insertions(+), 8 deletions(-)
 create mode 100644 include/linux/usb/samsung_usb_phy.h
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 319dcfa..46ca5ef 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/of_gpio.h>
 #include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/usb/samsung_usb_phy.h>
 #include <plat/usb-phy.h>

 #define EHCI_INSNREG00(base)                   (base + 0x90)
@@ -164,7 +165,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
        }

        if (pdata->phy_init)
-               pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+               pdata->phy_init(pdev, USB_PHY_TYPE_HOST);

        ehci = hcd_to_ehci(hcd);
        ehci->caps = hcd->regs;
@@ -198,7 +199,7 @@ static int s5p_ehci_remove(struct platform_device *pdev)
        usb_remove_hcd(hcd);

        if (pdata && pdata->phy_exit)
-               pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+               pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);

        clk_disable_unprepare(s5p_ehci->clk);
@@ -229,7 +230,7 @@ static int s5p_ehci_suspend(struct device *dev)
        rc = ehci_suspend(hcd, do_wakeup);

        if (pdata && pdata->phy_exit)
-               pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+               pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);

        clk_disable_unprepare(s5p_ehci->clk);
@@ -246,7 +247,7 @@ static int s5p_ehci_resume(struct device *dev)
        clk_prepare_enable(s5p_ehci->clk);

        if (pdata && pdata->phy_init)
-               pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+               pdata->phy_init(pdev, USB_PHY_TYPE_HOST);

        /* DMA burst Enable */
        writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index aa3b884..804fb62 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb-exynos.h>
+#include <linux/usb/samsung_usb_phy.h>
 #include <plat/usb-phy.h>

 struct exynos_ohci_hcd {
@@ -153,7 +154,7 @@ static int exynos_ohci_probe(struct platform_device *pdev)
        }

        if (pdata->phy_init)
-               pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+               pdata->phy_init(pdev, USB_PHY_TYPE_HOST);

        ohci = hcd_to_ohci(hcd);
        ohci_hcd_init(ohci);
@@ -184,7 +185,7 @@ static int exynos_ohci_remove(struct platform_device *pdev)
        usb_remove_hcd(hcd);

        if (pdata && pdata->phy_exit)
-               pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+               pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);

        clk_disable_unprepare(exynos_ohci->clk);
@@ -229,7 +230,7 @@ static int exynos_ohci_suspend(struct device *dev)
        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);

        if (pdata && pdata->phy_exit)
-               pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+               pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);

        clk_disable_unprepare(exynos_ohci->clk);
@@ -249,7 +250,7 @@ static int exynos_ohci_resume(struct device *dev)
        clk_prepare_enable(exynos_ohci->clk);

        if (pdata && pdata->phy_init)
-               pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+               pdata->phy_init(pdev, USB_PHY_TYPE_HOST);

        ohci_resume(hcd, false);
diff --git a/include/linux/usb/samsung_usb_phy.h b/include/linux/usb/samsung_usb_phy.h
new file mode 100644
index 0000000..9167826
--- /dev/null
+++ b/include/linux/usb/samsung_usb_phy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *             http://www.samsung.com/
+ *
+ * Defines phy types for samsung usb phy controllers - HOST or DEIVCE.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+enum samsung_usb_phy_type {
+       USB_PHY_TYPE_DEVICE,
+       USB_PHY_TYPE_HOST,
+};
--
1.7.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


-- 
Thanks & Regards
Vivek
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help