On 11/21/2012 06:45 AM, AnilKumar, Chimata wrote:

On Tue, Nov 20, 2012 at 15:56:32, Marc Kleine-Budde wrote:

quoted

On 11/20/2012 11:23 AM, AnilKumar, Chimata wrote:

quoted

On Tue, Nov 20, 2012 at 15:43:04, Marc Kleine-Budde wrote:

quoted

On 11/14/2012 07:08 PM, AnilKumar Ch wrote:

quoted

Add a new address space/memory resource to d_can device tree node. D_CAN
RAM initialization is achieved through RAMINIT register which is part of
AM33XX control module address space. D_CAN RAM init or de-init should be
done by writing instance corresponding value to control module register.

Till we have a separate control module driver to write to control module,
d_can driver will handle the register writes to control module by itself.
So a new address space to represent this control module register is added
to d_can driver.

Signed-off-by: AnilKumar Ch <redacted>

This does not apply to net-next/master:

Applying: ARM: dts: AM33XX: Add memory resource to d_can node
error: patch failed: arch/arm/boot/dts/am33xx.dtsi:227
error: arch/arm/boot/dts/am33xx.dtsi: patch does not apply
Patch failed at 0003 ARM: dts: AM33XX: Add memory resource to d_can node

Marc,

Sorry about this DT changes are present in linux-omap.

Could you please take the driver changes only and ACK on remaining will
help.

Will do - I'm currently looking at the driver.

Hi Marc,

Please ACK this patch as well.

done :)

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |