[PATCH 6/6] ASoC: fsl: add imx-wm8974 machine driver
From: Steffen Trumtrar <hidden>
Date: 2012-11-09 14:00:25
Also in:
alsa-devel, linux-arm-kernel, linux-spi
Subsystem:
freescale soc sound drivers, open firmware and flattened device tree bindings, sound, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Shengjiu Wang, Xiubo Li, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Jaroslav Kysela, Takashi Iwai, Liam Girdwood, Mark Brown, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2012-11-09 · Re: [PATCH 6/6] ASoC: fsl: add imx-wm8974 machine driver · Steffen Trumtrar <hidden>
- 2012-11-09 · Re: [PATCH 6/6] ASoC: fsl: add imx-wm8974 machine driver · Mark Brown <hidden>
This is the initial support for a wm8974 sound codec connected to an imx ssi. It follows along the lines of the imx-sgtl5000 driver. * only the playback dai link is implemented. * DT only driver, working with the fsl_ssi driver and imx21 compatible audmux Signed-off-by: Steffen Trumtrar <redacted> --- .../devicetree/bindings/sound/imx-audio-wm8974.txt | 48 ++++ sound/soc/fsl/Kconfig | 12 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/imx-wm8974.c | 233 ++++++++++++++++++++ 4 files changed, 295 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-wm8974.txt create mode 100644 sound/soc/fsl/imx-wm8974.c
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-wm8974.txt b/Documentation/devicetree/bindings/sound/imx-audio-wm8974.txt
new file mode 100644
index 0000000..7e661e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-wm8974.txt@@ -0,0 +1,48 @@ +Freescale i.MX audio complex with WM8974 codec + +Required properties: +- compatible : "fsl,imx-audio-wm8974" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller (imx21 compatible) +- audio-codec : The phandle of the WM8974 audio codec +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names could be power + supplies, WM8974 pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + WM8974 pins: + * MICN + * MICP + * AUX + * MONOOUT + * SPKOUTP + * SPKOUTN + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + +sound { + compatible = "fsl,imx-audio-wm8974"; + model = "wm8974"; + ssi-controller = <&ssi1>; + audio-codec = <&wm8974>; + audio-routing = + "Mic Jack", "Mic Bias", + mux-int-port = <1>; + mux-ext-port = <4>; +};
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 4563b28..19d9b31 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig@@ -179,4 +179,16 @@ config SND_SOC_IMX_MC13783 select SND_SOC_MC13783 select SND_SOC_IMX_PCM_DMA +config SND_SOC_IMX_WM8974 + tristate "SoC Audio support for i.MX boards with WM8974" + depends on OF && SPI + select SND_SOC_IMX_AUDMUX + select SND_SOC_IMX_PCM_DMA + select SND_SOC_FSL_SSI + select SND_SOC_FSL_UTILS + select SND_SOC_WM8974 + help + Say Y here if you want to add support for SoC audio on an i.MX board with + a wm8974 codec. + endif # SND_IMX_SOC
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index 5f3cf3f..1a8ac3d 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile@@ -42,6 +42,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o snd-soc-wm1133-ev1-objs := wm1133-ev1.o snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o snd-soc-imx-mc13783-objs := imx-mc13783.o +snd-soc-imx-wm8974-objs := imx-wm8974.o obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
@@ -49,3 +50,4 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o +obj-$(CONFIG_SND_SOC_IMX_WM8974) += snd-soc-imx-wm8974.o
diff --git a/sound/soc/fsl/imx-wm8974.c b/sound/soc/fsl/imx-wm8974.c
new file mode 100644
index 0000000..02b239d
--- /dev/null
+++ b/sound/soc/fsl/imx-wm8974.c@@ -0,0 +1,233 @@ +/* + * Copyright (C) 2012 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + * Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/module.h> +#include <sound/soc.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/spi/spi.h> +#include <linux/clk.h> + +#include "imx-audmux.h" +#include "../codecs/wm8974.h" + +#define DRIVER_NAME "imx-wm8974" + +#define DAI_NAME_SIZE 32 + +struct imx_wm8974_data { + struct snd_soc_dai_link dai; + struct snd_soc_card card; + char codec_dai_name[DAI_NAME_SIZE]; + char platform_name[DAI_NAME_SIZE]; + struct clk *codec_clk; + unsigned int clk_frequency; +}; + +static int imx_wm8974_dai_init(struct snd_soc_pcm_runtime *rtd) +{ + struct imx_wm8974_data *data = container_of(rtd->card, + struct imx_wm8974_data, card); + struct device *dev = rtd->card->dev; + int ret; + + /* the pll stability peaks at N=8 and around 90MHz. + * This values are best reached with a 12.288MHz or + * 11.289MHz clock. As the first is closer to N=8 in + * more situations, chose 12.288MHz as the target clock + * (ref: datasheet section "Master Clock and Phase Locked Loop")*/ + ret = snd_soc_dai_set_pll(rtd->codec_dai, 0, 0, data->clk_frequency, + 12288000); + if (ret) { + dev_err(dev, "couldn't set pll: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct snd_soc_dapm_widget imx_wm8974_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static int __devinit imx_wm8974_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *ssi_np, *codec_np; + struct device_node *audmux_np; + struct platform_device *ssi_pdev; + struct spi_device *codec_pdev; + struct imx_wm8974_data *data; + int int_port, ext_port; + int ret; + + ret = of_property_read_u32(np, "mux-int-port", &int_port); + if (ret) { + dev_err(&pdev->dev, "mux-int-port missing or invalid\n"); + return ret; + } + ret = of_property_read_u32(np, "mux-ext-port", &ext_port); + if (ret) { + dev_err(&pdev->dev, "mux-ext-port missing or invalid\n"); + return ret; + } + + /* + * The port numbering in the hardware manual starts at 1, while + * the audmux API expects it starts at 0. + */ + int_port--; + ext_port--; + + audmux_np = of_find_node_by_name(NULL, "audmux"); + if (!audmux_np) { + dev_err(&pdev->dev, "audmux missing or invalid\n"); + return ret; + } + + if (of_device_is_compatible(audmux_np, "fsl,imx21-audmux")) { + ret = imx_audmux_v1_configure_port(int_port, + IMX_AUDMUX_V1_PCR_TFSDIR | + IMX_AUDMUX_V1_PCR_TCLKDIR | + IMX_AUDMUX_V1_PCR_TFCSEL(ext_port) | + IMX_AUDMUX_V1_PCR_RXDSEL(ext_port) | + IMX_AUDMUX_V1_PCR_SYN); + if (ret) { + dev_err(&pdev->dev, "audmux internal port setup failed\n"); + return ret; + } + ret = imx_audmux_v1_configure_port(ext_port, + IMX_AUDMUX_V1_PCR_RXDSEL(int_port) | + IMX_AUDMUX_V1_PCR_SYN); + if (ret) { + dev_err(&pdev->dev, "audmux external port setup failed\n"); + return ret; + } + } else { + dev_err(&pdev->dev, "audmux not compatible\n"); + } + of_node_put(audmux_np); + + ssi_np = of_parse_phandle(np, "ssi-controller", 0); + codec_np = of_parse_phandle(np, "audio-codec", 0); + if (!ssi_np || !codec_np) { + dev_err(&pdev->dev, "phandle missing or invalid\n"); + ret = -EINVAL; + goto fail; + } + + ssi_pdev = of_find_device_by_node(ssi_np); + if (!ssi_pdev) { + dev_err(&pdev->dev, "failed to find SSI platform device\n"); + ret = -EINVAL; + goto fail; + } + + codec_pdev = of_find_spi_device_by_node(codec_np); + if (!codec_pdev) { + dev_err(&pdev->dev, "failed to find codec platform device\n"); + ret = -EINVAL; + goto fail; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto fail; + } + + data->codec_clk = clk_get(&codec_pdev->dev, NULL); + if (IS_ERR(data->codec_clk)) { + data->codec_clk = NULL; + ret = of_property_read_u32(codec_np, "clock-frequency", + &data->clk_frequency); + if (ret) { + dev_err(&codec_pdev->dev, + "clock-frequency missing or invalid\n"); + goto fail; + } + } else { + data->clk_frequency = clk_get_rate(data->codec_clk); + clk_prepare_enable(data->codec_clk); + } + + data->dai.name = "HiFi"; + data->dai.stream_name = "HiFi"; + data->dai.codec_dai_name = "wm8974-hifi"; + data->dai.codec_of_node = codec_np; + data->dai.cpu_dai_name = dev_name(&ssi_pdev->dev); + data->dai.platform_name = "imx-pcm-audio"; + data->dai.init = &imx_wm8974_dai_init; + data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM; + + data->card.dev = &pdev->dev; + ret = snd_soc_of_parse_card_name(&data->card, "model"); + if (ret) + goto clk_fail; + ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing"); + if (ret) + goto clk_fail; + + data->card.name = "wm8974-hifi"; + data->card.num_links = 1; + data->card.dai_link = &data->dai; + data->card.dapm_widgets = imx_wm8974_dapm_widgets; + data->card.num_dapm_widgets = ARRAY_SIZE(imx_wm8974_dapm_widgets); + + ret = snd_soc_register_card(&data->card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); + goto clk_fail; + } + + platform_set_drvdata(pdev, data); + +clk_fail: + clk_put(data->codec_clk); +fail: + if (ssi_np) + of_node_put(ssi_np); + if (codec_np) + of_node_put(codec_np); + if (codec_pdev) + spi_dev_put(codec_pdev); + return ret; +} + +static int __devexit imx_wm8974_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + snd_soc_unregister_card(card); + + return 0; +} + +static const struct of_device_id imx_wm8974_of_match[] __devinitconst = { + { .compatible = "fsl,imx-audio-wm8974", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_wm8974_of_match); + +static struct platform_driver imx_wm8974_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = imx_wm8974_of_match, + }, + .probe = imx_wm8974_probe, + .remove = __devexit_p(imx_wm8974_remove), +}; +module_platform_driver(imx_wm8974_driver); + +MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>"); +MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME);
--
1.7.10.4
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_nov