Thread (1 message) flat view 1 message, 1 author, 2012-10-18

RE: [PATCH] ARM: dts: AM33XX: Add tsl2550 ambient light sensor DT data

From: AnilKumar, Chimata <hidden>
Date: 2012-10-18 11:24:38
Also in: linux-arm-kernel, linux-omap

+Grant, DTML

On Thu, Oct 18, 2012 at 13:38:30, Cousson, Benoit wrote:
Hi Anil,

On 10/18/2012 07:46 AM, AnilKumar, Chimata wrote:
quoted
On Fri, Sep 21, 2012 at 21:19:11, AnilKumar, Chimata wrote:
quoted
Add tsl2550 ambient light sensor DT data to am335x-evm.dts. In AM335x
EVM tsl2550 ambient light sensor is connected to I2C2 bus. So this patch
adds child node inside i2c2 node with i2c slave address.

TAOS tsl2550 sensor with two-wire SMBus serial interface. This patch
also reduces I2C2 clock frequency to 100KHz from 400KHz because the
maximum clock frequency of SMBus is 100KHz.

Signed-off-by: AnilKumar Ch <redacted>
---
 arch/arm/boot/dts/am335x-evm.dts |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 3b1f313..d99aa0f 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -49,7 +49,7 @@
 
 		i2c2: i2c@4802a000 {
 			status = "okay";
-			clock-frequency = <400000>;
+			clock-frequency = <100000>;
 
 			lis331dlh: lis331dlh@18 {
 				compatible = "st,lis331dlh", "st,lis3lv02d";
@@ -79,6 +79,11 @@
 				st,max-limit-z = <750>;
 			};
 
+			tsl2550: tsl2550@39 {
+				compatible = "taos,tsl2550";
+				reg = <0x39>;
+			};
+
 			tmp275: tmp275@48 {
 				compatible = "ti,tmp275";
 				reg = <0x48>;
Hi Tony/Benoit,

If there are no comments in this patch could you please take this in?
Have you updated the binding documentation to list the device?

It should be in:
Documentation/devicetree/bindings/i2c/trivial-devices.txt
No I have not updated, I will send a separate patch by adding all the supported
devices, missed from earlier (this device, tmp275 and lis331dlh)

Thanks
AnilKumar
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help