On 10/15/2012 01:51 AM, Bo Shen wrote:

When i2c-gpio node number is greater than 1, the name for each is same
So add the patch to fix it.

The adap->name printing information is add by myself

without this patch the log information is as following
---<8---
adap->name = i2c-gpio-1
i2c-gpio i2c.2: using pins 30 (SDA) and 31 (SCL)
adap->name = i2c-gpio-1
i2c-gpio i2c.3: using pins 64 (SDA) and 65 (SCL)
--->8---

with this patch, the log information is as following
---<8---
adap->name = i2c.2
i2c-gpio i2c.2: using pins 30 (SDA) and 31 (SCL)
adap->name = i2c.3
i2c-gpio i2c.3: using pins 64 (SDA) and 65 (SCL)
--->8---

I think this is reasonable, although I imagine this has zero effect on
the I2C bus number that's assigned to the device, so I'm not sure how it
interacts with or supports the other Atmel patch series you sent, which
I didn't really look at in much detail.

Reviewed-by: Stephen Warren <redacted>