Re: [RFC-v2 2/7] capebus: Add beaglebone board support
flat view
From: Tony Lindgren <tony@atomide.com>
Date: 2012-10-31 17:55:54
Also in:
linux-omap, lkml
* Pantelis Antoniou [off-list ref] [121031 10:41]:
Introduce beaglebone capebus board support.
...
quoted hunk ↗ jump to hunk
--- /dev/null +++ b/drivers/capebus/boards/Kconfig@@ -0,0 +1,6 @@ +config CAPEBUS_BONE_CONTROLLER + bool "Beaglebone capebus board controller" + depends on CAPEBUS && ARCH_OMAP2PLUS && OF && I2C + default n
The default is n, so you can remove "default n" from your patches.
quoted hunk ↗ jump to hunk
+++ b/drivers/capebus/boards/capebus-bone-generic.c@@ -0,0 +1,237 @@ +/* + * TI Beaglebone capebus controller - Generic devices + * + * Copyright (C) 2012 Pantelis Antoniou <panto@antoniou-consulting.com> + * Copyright (C) 2012 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <video/da8xx-fb.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/consumer.h> +#include <linux/atomic.h> +#include <linux/clk.h> +#include <asm/barrier.h> +#include <plat/clock.h> +#include <plat/omap_device.h>
You need to check your patches to make sure you don't need any #include <plat/*.h> or #include <mach/*.h> as those are already not available for drivers in linux next. Regards, Tony