Re: [PATCH v6 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone
From: Tony Lindgren <tony@atomide.com>
Date: 2012-09-06 20:58:12
Also in:
linux-arm-kernel, linux-omap
* AnilKumar Ch [off-list ref] [120905 04:42]:
quoted hunk ↗ jump to hunk
Adds GPIO pinctrl nodes to am3358_pinmux master node to control user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. [koen@dominion.thruhere.net: led0, led1 suggested by koen] Signed-off-by: AnilKumar Ch <redacted> --- arch/arm/boot/dts/am335x-bone.dts | 43 +++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87..822efe6 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts@@ -18,11 +18,54 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am3358_pinmux: pinmux@44e10800 { + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; +
Just checking.. am3358_pinmux should be am33xx_pinmux in this patch too as discussed. Regards, Tony