Re: [PATCH RESEND v5 3/3] arm/dts: AM33XX: Add D_CAN device tree data
From: Marc Kleine-Budde <hidden>
Date: 2012-09-05 13:46:58
Also in:
linux-arm-kernel, linux-omap
On 09/05/2012 01:41 PM, AnilKumar Ch wrote:
quoted hunk
Add Bosch D_CAN controller device tree data to AM33XX dtsi file by adding d_can device nodes with all the necessary parameters. Signed-off-by: AnilKumar Ch <redacted> --- arch/arm/boot/dts/am33xx.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bf5f713..ab744d6 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi@@ -177,5 +177,23 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; }; + + dcan0: d_can@481cc000 { + compatible = "bosch,d_can";
On imx/mxs we also add a compatible for the current hardware, this may look like this: compatible = "ti,am33xx-can", "bosch,d_can"; But I don't know if this is a generic policy or just an imx/mxs thing :) Marc
+ ti,hwmods = "d_can0";
+ reg = <0x481cc000 0x2000>;
+ interrupts = <52>;
+ interrupt-parent = <&intc>;
+ status = "disabled";
+ };
+
+ dcan1: d_can@481d0000 {
+ compatible = "bosch,d_can";
+ ti,hwmods = "d_can1";
+ reg = <0x481d0000 0x2000>;
+ interrupts = <55>;
+ interrupt-parent = <&intc>;
+ status = "disabled";
+ };
};
};-- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |