[PATCH v3 2/3] ARM: dts: Add twl4030-usb data
flat view
STALE5022d
REVIEWED: 1 (0M)
From: Kishon Vijay Abraham I <hidden>
Date: 2012-09-19 09:32:50
Also in:
linux-arm-kernel, linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v3 of 4 in this series; 1 review trailer.
Revisions (4)
- v3 current
- v1 [diff vs current]
- v2 [diff vs current]
- v3
Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy driver for MUSB used in omap3 chipsets. The dt data is comprised of two interrupts, one for ID and one for VBUS and three phandles to regulator. Acked-by: Felipe Balbi <redacted> Signed-off-by: Kishon Vijay Abraham I <redacted> --- arch/arm/boot/dts/twl4030.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ff00017..18fa7a4 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi@@ -37,6 +37,18 @@ regulator-max-microvolt = <3150000>; }; + vusb1v5: regulator-vusb1v5 { + compatible = "ti,twl4030-vusb1v5"; + }; + + vusb1v8: regulator-vusb1v8 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + twl_gpio: gpio { compatible = "ti,twl4030-gpio"; gpio-controller;
@@ -44,4 +56,13 @@ interrupt-controller; #interrupt-cells = <1>; }; + + twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = <10>, <4>; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; + }; };
--
1.7.9.5