On 08/02/2012 01:21 PM, AnilKumar, Chimata wrote:

Marc,

On Thu, Aug 02, 2012 at 16:43:04, Marc Kleine-Budde wrote:

quoted

On 08/02/2012 01:02 PM, AnilKumar Ch wrote:

quoted

This patch series adds the device tree support and Runtime PM support
to C_CAN/D_CAN controller.

These patches have been tested on AM335x EVM using some additional
patches to add device tree data to EVM dts files and to initialize
D_CAN RAM. D_CAN raminit is controlled from control module register.
This patch will be submitted once control module MFD driver support
is added.

These patches are based on linx-can-next tree.

Due to lack of hardware I am not able to test c_can functionality.
I appreciate if anyone can test c_can functionality with this patch
series.

Changes from v2:
	- Incorporated Marcs on v2
	  * Fix compilation errors in pci due to device name changes
	  in v2 by adding new patch.

Changes from v1:
	- Separated 4 patches into CAN driver specific and device
	  tree data addition specific.
	- Incorporated Marc's comments on v1
	  * Modified c_can_dev_id enum to handle both devtype and
	    platform device id index.
	  * Removed "legacy bosch,c_can_platform" from DT bindings

AnilKumar Ch (3):
  can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
  can: c_can: Modify c_can device names in c_can_pci driver

You break bisectability here. After patch 1 the pci driver will not
compile anymore. I suggest to do the renaming of enum c_can_dev_id and
all it's users in patch 1.

I will merge patch 1 and 2 and submit v4.

But changing the pci driver has nothing to do with the subject ("Add
device tree support to Bosch C_CAN/D_CAN controller").

It's considered bad practise to do so.

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |