On 08/13/2012 12:05 PM, Sourav Poddar wrote:
quoted hunk ↗ jump to hunk
Add tmp102 temperature sensor data in omap5 evm dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc: Benoit Cousson <redacted>
Cc: Felipe Balbi <redacted>
Cc: Santosh Shilimkar <redacted>
Acked-by: Felipe Balbi <redacted>
Signed-off-by: Sourav Poddar <redacted>
---
arch/arm/boot/dts/omap5-evm.dts | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 200c39a..45a8aeb 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -18,3 +18,12 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
};
+
+&i2c4 {
+ clock-frequency = <400000>;
Have you checked if we cannot run at faster speed? Reducing the speed
will impact every devices on the bus.
It might be needed, I just wanted to be sure.
You should maybe just add a small comment to explain what the device is
doing with potentially a link to the HW spec if available.
The same comments are applicable to the bmp085 patch.
Regards,
Benoit