Thread (6 messages) 6 messages, 2 authors, 2012-08-01
STALE5053d

[PATCH v6 07/11] usb: otg: nop: add dt support

From: Ravi B <hidden>
Date: 2012-07-27 08:32:03
Also in: linux-omap
Subsystem: open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman

From: Ajay Kumar Gupta <redacted>

Added device tree support for nop transceiver driver and updated the
Documentation with device tree binding information for am33xx platform.

Signed-off-by: Ajay Kumar Gupta <redacted>
Signed-off-by: Ravi B <redacted>
---
 .../devicetree/bindings/usb/am33xx-usb.txt         |    3 +++
 drivers/usb/otg/nop-usb-xceiv.c                    |   10 ++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index ca8fa56..9782585 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -12,3 +12,6 @@ AM33XX MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "250". This signifies the controller can supply upto
    500mA when operating in host mode.
+
+NOP USB PHY
+ - compatible : Should be "nop-xceiv-usb"
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index fc899e4..90889d9 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/otg.h>
@@ -188,12 +189,21 @@ static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id nop_xceiv_id_table[] = {
+	{ .compatible = "nop-xceiv-usb" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, nop_xceiv_id_table);
+#endif
+
 static struct platform_driver nop_usb_xceiv_driver = {
 	.probe		= nop_usb_xceiv_probe,
 	.remove		= __devexit_p(nop_usb_xceiv_remove),
 	.driver		= {
 		.name	= "nop_usb_xceiv",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(nop_xceiv_id_table),
 	},
 };
 
-- 
1.7.0.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help