Re: [PATCH] ARM: davinci: cp_intc: Add OF support for TI interrupt controller

Hi Grant,

On 7/5/2012 6:13 PM, Heiko Schocher wrote:

Hello Sekhar,

On 03.07.2012 21:16, Sekhar Nori wrote:

quoted

From: Heiko Schocher<redacted>

Add a function to initialize the Common Platform Interrupt Controller
(cp_intc) from TI used on OMAP-L1x SoCs using a device tree node.

Signed-off-by: Heiko Schocher<redacted>
Cc: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: Grant Likely<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Sekhar Nori<redacted>
Cc: Wolfgang Denk<redacted>
Cc: Sergei Shtylyov<redacted>
Signed-off-by: Sekhar Nori<redacted>
---
  .../devicetree/bindings/arm/davinci/cp-intc.txt    |   27
++++++++++++++++++++
  arch/arm/mach-davinci/cp_intc.c                    |   16 +++++++++---
  arch/arm/mach-davinci/include/mach/cp_intc.h       |    1 +
  3 files changed, 41 insertions(+), 3 deletions(-)
  create mode 100644
Documentation/devicetree/bindings/arm/davinci/cp-intc.txt

Thanks!

Tested on the enbw_cmc board.

Any further feedback on this? If you are OK, I would like to queue this
for v3.6 through DaVinci tree.

Thanks,
Sekhar