Thread (1 message) 1 message, 1 author, 2012-06-22

Re: [PATCH] of: fix a few typos in the binding documentation

From: Uwe Kleine-König <hidden>
Date: 2012-06-22 05:49:42

Hello Randy,

expanding the audience a bit ...

On Fri, May 18, 2012 at 04:21:48PM +0200, Uwe Kleine-König wrote:
On Mon, Apr 23, 2012 at 10:57:23AM +0200, Uwe Kleine-König wrote:
quoted
Signed-off-by: Uwe Kleine-König <redacted>
---
 Documentation/devicetree/bindings/mtd/atmel-nand.txt |    2 +-
 Documentation/devicetree/bindings/mtd/partition.txt  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index a200695..0c1bccd 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -3,7 +3,7 @@ Atmel NAND flash
 Required properties:
 - compatible : "atmel,at91rm9200-nand".
 - reg : should specify localbus address and size used for the chip,
-	and if availlable the ECC.
+	and if available the ECC.
 - atmel,nand-addr-offset : offset for the address latch.
 - atmel,nand-cmd-offset : offset for the command latch.
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
index f114ce1..6e1f61f 100644
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -35,4 +35,4 @@ flash@0 {
 	uimage@100000 {
 		reg = <0x0100000 0x200000>;
 	};
-];
+};
this patch didn't appear in next yet (looking at next-20120518). Do you
have concerns? Or do you think someone else should take and/or ack the
patch?
ping

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help