Thread (7 messages) 7 messages, 3 authors, 2012-06-30

Re: [PATCH v10] MTD: LPC32xx MLC NAND driver

From: Artem Bityutskiy <dedekind1@gmail.com>
Date: 2012-06-29 12:33:13
Also in: linux-arm-kernel, lkml

On Wed, 2012-06-27 at 23:55 +0200, Roland Stigge wrote:
This patch adds a driver for the MLC NAND controller of the LPC32xx SoC.

Signed-off-by: Roland Stigge <redacted>
Signed-off-by: Alexandre Pereira da Silva <redacted>
---
Aiaiai complains like this about your patch, please, take a look:

--------------------------------------------------------------------------------

Successfully built configuration "arm-lpc32xx_defconfig,arm,arm-unknown-linux-gnueabi-", results:
--- before_patching.log
+++ after_patching.log
@@ @@
+drivers/mtd/nand/lpc32xx_mlc.c: In function 'lpc32xx_nand_probe':
+drivers/mtd/nand/lpc32xx_mlc.c:679:10: warning: variable 'sr' set but not used [-Wunused-but-set-variable]
+drivers/mtd/nand/lpc32xx_mlc.c:561:24: error: bad constant expression [sparse]

--------------------------------------------------------------------------------
checkpatch.pl has some complaints:

--------------------------------------------------------------------------------

checkpatch.pl results for patch "[PATCH] MTD: LPC32xx MLC NAND driver"

ERROR:INITIALISED_STATIC: do not initialise statics to 0 or NULL
#339: FILE: drivers/mtd/nand/lpc32xx_mlc.c:224:
+static int use_dma = 0;

total: 1 errors, 0 warnings, 1004 lines checked

--------------------------------------------------------------------------------

-- 
Best Regards,
Artem Bityutskiy

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help