Re: [PATCH v2 0/3] EDAC support for Calxeda Highbank

Hi Rob,

Em 11-06-2012 23:32, Rob Herring escreveu:

From: Rob Herring <redacted>

This series adds EDAC support for Calxeda Highbank platform L2 and
memory ECC hardware.

This version is rebased current edac next tree for 3.6. Changes in
this version are the addition of a common edac debugfs directory and
coverting the highbank error injection to use debugfs.

Thanks for the patches.

It looks OK on my eyes, with regards to the EDAC API usage. While this patch
touches at the arm/devicetree stuff, most of the changes belong to EDAC, so
I'll apply them with my SOB on my tree.

Regards,
Mauro.

Rob

Rob Herring (3):
   edac: create top-level debugfs directory
   edac: add support for Calxeda highbank memory controller
   edac: add support for Calxeda highbank L2 cache ecc

  .../devicetree/bindings/arm/calxeda/l2ecc.txt      |   17 ++
  .../devicetree/bindings/arm/calxeda/mem-ctrlr.txt  |   17 ++
  arch/arm/boot/dts/highbank.dts                     |   12 +
  drivers/edac/Kconfig                               |   16 +-
  drivers/edac/Makefile                              |    4 +
  drivers/edac/edac_mc_sysfs.c                       |   23 +-
  drivers/edac/edac_module.c                         |    3 +
  drivers/edac/edac_module.h                         |   14 ++
  drivers/edac/highbank_l2_edac.c                    |  149 ++++++++++++
  drivers/edac/highbank_mc_edac.c                    |  256 ++++++++++++++++++++
  10 files changed, 509 insertions(+), 2 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
  create mode 100644 Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
  create mode 100644 drivers/edac/highbank_l2_edac.c
  create mode 100644 drivers/edac/highbank_mc_edac.c