Re: [PATCH v3 3/3] ARM: dts: add nodes for atmel hsmci controllers for atmel platforms
From: ludovic.desroches <hidden>
Date: 2012-05-22 14:41:35
Also in:
linux-arm-kernel, linux-mmc
Le 05/22/2012 04:13 PM, Jean-Christophe PLAGNIOL-VILLARD a écrit :
On 12:09 Tue 22 May , ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org wrote:quoted
From: Ludovic Desroches<redacted> Add nodes for mci controllers. Signed-off-by: Ludovic Desroches<redacted> --- arch/arm/boot/dts/at91sam9g20.dtsi | 12 ++++++++++++ arch/arm/boot/dts/at91sam9g25ek.dts | 16 ++++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9m10g45ek.dts | 17 +++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 24 ++++++++++++++++++++++++ 5 files changed, 93 insertions(+), 0 deletions(-)diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 773ef48..6a28bfe 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi@@ -197,6 +197,18 @@ interrupts =<10 4>; status = "disabled"; }; + + mmc0: mmc@fffa800 { + compatible = "atmel,hsmci"; + reg =<0xfffa800 0x600>; + interrupts =<9 4>; + status = "disabled"; + #address-cells =<1>; + #size-cells =<0>; + slot@0 { + reg =<0>; + }; + };this need to be in 9260.dtsi if you add the board too plese add all of them or seperate the commits
I based it on 3.4 so 9260.dtsi was not present. Nicolas gave me a new branch with it so I will add mmc node to 9260. Regards Ludovic