On Wed, 2 May 2012 10:57:11 -0700, Olof Johansson [off-list ref] wrote:

Hi,

[adding devicetree-discuss]

On Mon, Apr 30, 2012 at 12:14 PM, Thomas Abraham
[off-list ref] wrote:

quoted

And interrupt combiner, external interrupt wakeup interrupt controller
and smsc9215 lan controller nodes.

Signed-off-by: Thomas Abraham <redacted>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts |   11 ++++++
 arch/arm/boot/dts/exynos5250.dtsi         |   55 +++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index bcc4b89..dbc4bdb 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -24,6 +24,17 @@

               bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
       };

+       lan9215@0x05000000 {
+               compatible = "smsc,lan9215", "smsc,lan9115";
+               reg = <0x05000000 0x20000>;
+               interrupts = <5 0>;
+               interrupt-parent = <&wakeup_eint>;
+               phy-mode = "mii";
+               smsc,irq-push-pull;
+               smsc,force-internal-phy;
+               local-mac-address = [00 80 00 23 45 67];
+       };
+

since the 911x sits on a chipselect bus, you should instead add that
bus to the dtsi and define this on that bus.

Something like this in the dtsi:

       sromc-bus {
               #address-cells = <2>;
               #size-cells = <1>;
               ranges = < 0 0 0x04000000 0x20000
                          1 0 0x05000000 0x20000
                          2 0 0x06000000 0x20000
                          3 0 0x07000000 0x20000>;
       };

and in the dts:

       sromc-bus {
               lan9215@1,0 {
                       compatible = "smsc,lan9215", "smsc,lan9115";
                       reg = <1 0 0x20000>;
                       interrupts = <5 0>;
                       interrupt-parent = <&wakeup_eint>;
                       phy-mode = "mii";
                       smsc,irq-push-pull;
                       smsc,force-internal-phy;
                       local-mac-address = [00 80 00 23 45 67];
               };
        };


(You might be able to do just fine with one address cell, I'm not 100%
sure why Grant's example uses two, but I used the same above for
consistency).

Because otherwise there is no way to describe an offset from the base
of the chipselect base value, and the core code will try to apply the
size to the cs part of the address specifier. (so in the example
above the address range described by:

	reg = <1 0x20000>;

would mean cs values 1 to 0x20001; which is definitely wrong.

Also, I don't think it's a good idea to hardcode the mac address in
the dts like this; have u-boot fill it in from the environment
variable there instead, if needed.

Very bad practice indeed.