Re: Two different interrupt-parents

On Sun, Apr 15, 2012 at 11:40 PM, Sethi Varun-B16395
[off-list ref] wrote:

Hi Jon,
Does the cascaded PIC have an interrupt line to the system interrupt controller?

There are four cascade lines. The 128 inputs on the cascade controller
can be arbitrarily mapped onto these four lines.

Regards
Varun

quoted

-----Original Message-----
From: devicetree-discuss-
bounces+varun.sethi=freescale.com-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org [mailto:devicetree-
discuss-bounces+varun.sethi=freescale.com-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org] On Behalf Of
jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Sent: Sunday, April 15, 2012 8:27 AM
To: devicetree-discuss
Subject: Two different interrupt-parents

How do you define a device with two different interrupt parents?

I have a OTG USB controller where the main usb interrupt is on the system
interrupt controller and the OTG power interrupts are on a cascaded PIC.

--
Jon Smirl
jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

-- 
Jon Smirl
jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org