RE: standalone dtc compiler build from git://git.jdl.com/software/dtc.git gives error

quoted

-----Original Message-----
From: Stephen Warren [mailto:swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org]
Sent: Wednesday, April 11, 2012 2:21 PM
To: Karicheri, Muralidharan
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: Re: standalone dtc compiler build from git://git.jdl.com/software/dtc.git gives
error

On 04/11/2012 11:59 AM, Karicheri, Muralidharan wrote:

quoted

Hi, Jon Lolieger,

I have tried using the standalone dtc compiler at git://git.jdl.com/software/dtc.git
to compile my dts file and got the following error:-

a0868495@ares-ubuntu:~/dtc$ dtc -I dts -O dtb tci6614-evm.dts
DTC: dts->dtb  on file "tci6614-evm.dts"
tci6614-evm.dts:4 syntax error

...

quoted

Why is the dtc not able to compile the dts file?

I think the only way to answer that is going to be to post your .dts
file, or at least the first 4 or 5 lines of it.

Stephen,

Thanks for responding.

Here it is 

/dts-v1/;
/include/ "skeleton.dtsi"

/ {
        model = "Texas Instruments TCI6614 EVM";
        compatible = "ti,tci6614-evm";
        #address-cells = <1>;
        #size-cells = <1>;

And "skeleton.dtsi" has 

/*
 * Skeleton device tree; the bare minimum needed to boot; just include and
 * add a compatible value.  The bootloader will typically populate the memory
 * node.
 */

/ {
        #address-cells = <1>;
        #size-cells = <1>;
        chosen { };
        aliases { };
        memory { device_type = "memory"; reg = <0 0>; };
};

BTW, the dtc compiler in the Linux kernel tree runs fine. Also I get the same error when I run the
dtc against other existing dts files in the Linux 3.2 kernel tree. Any clue?

Thanks

Murali