Thread (5 messages) 5 messages, 4 authors, 2012-03-09

Re: [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data

From: Grant Likely <hidden>
Date: 2012-03-09 15:49:11
Also in: linux-arm-kernel, linux-mmc, linux-omap

Possibly related (same subject, not in this thread)

On Fri, 24 Feb 2012 15:56:52 +0530, Rajendra Nayak [off-list ref] wrote:
On Friday 24 February 2012 03:46 PM, T Krishnamoorthy, Balaji wrote:
quoted
quoted
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 29f4589..9204f60 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -25,6 +25,11 @@
                serial1 =&uart2;
                serial2 =&uart3;
                serial3 =&uart4;
+               mmc1 =&mmc1;
+               mmc2 =&mmc2;
+               mmc3 =&mmc3;
+               mmc4 =&mmc4;
+               mmc5 =&mmc5;
        };

        cpus {
@@ -155,5 +160,31 @@
                        #size-cells =<0>;
                        ti,hwmods = "i2c4";
                };
+
+               mmc1: mmc@1 {
+                       compatible = "ti,omap4-hsmmc";
+                       ti,hwmods = "mmc1";
+                       ti,dual-volt;
+               };
+
+               mmc2: mmc@2 {
+                       compatible = "ti,omap4-hsmmc";
+                       ti,hwmods = "mmc2";
+               };
Hi Rajendra,
Is there a way to control the device registration order,
eMMC connected to mmc2 needs to be registered as /dev/mmcblk0p ...
irrespective of whether SD card is mount or not on mmc1 card slot.
So that bootargs would not have to be modified when filesystem is on eMMC.
I don't know if we can, but even if we could, we take care of the same
bootargs working on two boards (say sdp and panda) *if* on sdp I have my
filesystem on eMMC and on panda I have it on external card.
What happens if I want to use my filesystem on both boards on external
card?
of_alias_get_id() may be able to help you here.  It will extract the id
numbering from the /aliases node.  That is the safe way to do global
enumeration of devices in the device tree (instead of 'cell-index' which
is strongly discouraged)

g.
quoted
quoted
+
+               mmc3: mmc@3 {
+                       compatible = "ti,omap4-hsmmc";
+                       ti,hwmods = "mmc3";
+               };
+
+               mmc4: mmc@4 {
+                       compatible = "ti,omap4-hsmmc";
+                       ti,hwmods = "mmc4";
+               };
+
+               mmc5: mmc@5 {
+                       compatible = "ti,omap4-hsmmc";
+                       ti,hwmods = "mmc5";
+               };
        };
  };
--
1.7.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies,Ltd.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help