Re: [GIT PULL v3] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt

On Mon, Mar 05, 2012 at 02:34:34PM +0000, Arnd Bergmann wrote:

On Monday 05 March 2012, Jason wrote:

quoted

This is still bugging me.  If, say, orion_wdt.c is common to all of
plat-orion/ shouldn't it be in an 'orion.dtsi'?  With compatible =
"marvell,orion-wdt"?  Then, if hypothetically, kirkwood used the same
driver but had a small tweak, then kirkwood.dtsi would have
"marvell,kirkwood-wdt"?  Which would let the driver know that it needed
to apply the tweak because it was kirkwood.

Some drivers are common to all orion, but others are only used in some
out of {orion5k,kirkwood,mv78xx0,dove}. You could of course have
an orion.dtsi that is included in kirkwood.dtsi.

As Andrew just brought up, the drivers are common across all of them,
but the registers and irqs are different.  Which would seem to shoot
down the need for an orion.dtsi.

The registers/irqs are common across kirkwood, so the best place
probably is kirkwood.dtsi.

However, if they are placed in kirkwood.dtsi, having compatible =
"mrvl,88f6821-rtc" probably is not a good idea.  Not all kirkwoods have
the same dev_id.

BTW, I just realized that the patches that Haojian Zhuang sent for
pxa/mmp are using mrvl instead of marvell, and you should definitely
be using the same identifier both both. By convention we use the
stock ticker symbol as a unique identifier, which would be mrvl here.

Hehehe that was in the Manual, right?  ;-)

quoted

In this scenario, since kirkwood and dreamplug currently need no
modifications to the default wdt driver, they would just inherit
orion.dtsi's "marvell,orion-wdt", right?

I would still list both, so we are future-proof in case we need
to modify the driver in the future but don't want to modify
the device tree.

So, in kirkwood.dtsi, compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";

and, drivers without tweaks would match "mrvl,orion-rtc".

quoted

On the driver side, since it currently has no subarch or board specific
tweaks, then it is only good for the generic case,
"marvell,orion-wdt", and thus should only match it for now.

Yes.

Okay.

thx,

Jason.