Re: [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data
From: Rajendra Nayak <hidden>
Date: 2012-02-24 04:00:49
Also in:
linux-arm-kernel, linux-mmc, linux-omap
Possibly related (same subject, not in this thread)
- 2012-03-12 · [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data · Rajendra Nayak <hidden>
- 2012-02-24 · Re: [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data · Cousson, Benoit <hidden>
On Friday 24 February 2012 12:27 AM, Tony Lindgren wrote:
quoted
--- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi@@ -113,5 +113,31 @@ #size-cells =<0>; ti,hwmods = "i2c3"; }; + + mmc1: mmc@1 { + compatible = "ti,omap2-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + }; + + mmc2: mmc@2 { + compatible = "ti,omap2-hsmmc"; + ti,hwmods = "mmc2"; + }; + + mmc3: mmc@3 { + compatible = "ti,omap2-hsmmc"; + ti,hwmods = "mmc3"; + }; + + mmc4: mmc@4 { + compatible = "ti,omap2-hsmmc"; + ti,hwmods = "mmc4"; + }; + + mmc5: mmc@5 { + compatible = "ti,omap2-hsmmc"; + ti,hwmods = "mmc5"; + }; }; };These all should all be "ti,omap3-hsmmc" I guess?
Well, I defined the binding such that both omap2 and omap3 can use the same compatible "ti,omap2-hsmmc" since there is no difference in the way they are defined or handled. If thats confusing, I can have separate compatibles. Btw, I guess we do the same with a few other re-used IPs as well, I just checked and mcpsi does the same.
Tony