Re: [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030

Add initial device-tree support for twl familly chips.
The current version is missing the regulator entries due
to the lack of DT regulator bindings for the moment.
Only the simple sub-modules that do not depend on
platform_data information can be initialized properly.

Add documentation for the Texas Instruments TWL Integrated Chip.

Signed-off-by: Benoit Cousson <redacted>
Cc: Balaji T K <redacted>
Cc: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
Cc: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 .../devicetree/bindings/mfd/twl-familly.txt        |   47 +++++++++++++++++
 drivers/mfd/twl-core.c                             |   53 ++++++++++++++++++--
 2 files changed, 96 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/twl-familly.txt

diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
new file mode 100644
index 0000000..ff4cacd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt

@@ -0,0 +1,47 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+  For Integrated power-management/audio CODEC device used in OMAP3
+  based boards
+- compatible : Must be "ti,twl6030";
+  For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+  it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of severals variants
+  that support a different number of features.
+  The children nodes will thus depend of the capabilty of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl@48 {
+    compatible = "ti,twl6030";
+    reg = <0x48>;
+    interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+    interrupt-controller;
+    #interrupt-cells = <1>;
+    interrupt-parent = <&gic>;
+    #address-cells = <1>;
+    #size-cells = <0>;
+
+    twl_rtc {
+        compatible = "ti,twl_rtc";
+        interrupts = <11>;
+        reg = <0>;
+    };
+};

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index bfbd660..524d9d8 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c

@@ -34,6 +34,10 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
 
 #include <linux/regulator/machine.h>
 

@@ -1183,22 +1187,53 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	int				status;
 	unsigned			i;
 	struct twl4030_platform_data	*pdata = client->dev.platform_data;
+	struct device_node		*node = client->dev.of_node;
 	u8 temp;
 	int ret = 0;
 
+	if (node && !pdata) {
+		/*
+		 * XXX: Temporary fake pdata until the information
+		 * is correctly retrieved by every TWL modules from DT.
+		 */
+		pdata = kzalloc(sizeof(struct twl4030_platform_data),
+				GFP_KERNEL);

+	}
+
 	if (!pdata) {
 		dev_dbg(&client->dev, "no platform data?\n");
-		return -EINVAL;
+		status = -EINVAL;
+		goto fail_free;
 	}
 
 	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
 		dev_dbg(&client->dev, "can't talk I2C?\n");
-		return -EIO;
+		status = -EIO;
+		goto fail_free;
 	}
 
 	if (inuse) {
 		dev_dbg(&client->dev, "driver is already in use\n");
-		return -EBUSY;
+		status = -EBUSY;
+		goto fail_free;
 	}
 
 	for (i = 0; i < TWL_NUM_SLAVES; i++) {

@@ -1270,10 +1305,20 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
 	}
 
-	status = add_children(pdata, id->driver_data);
+#ifdef CONFIG_OF_DEVICE
+	if (node)
+		status = of_platform_populate(node, NULL, NULL, &client->dev);
+	else
+#endif
+		status = add_children(pdata, id->driver_data);
+
 fail:
 	if (status < 0)
 		twl_remove(client);
+fail_free:
+	if (node)
+		kfree(pdata);
+exit:
 	return status;
 }
 

-- 
1.7.0.4