[RFC PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller
From: Aneesh V <hidden>
Date: 2011-12-17 13:20:51
Subsystem:
memory controller drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
EMIF - External Memory Interface - is an SDRAM controller used in TI SoCs. EMIF supports, based on the IP revision, one or more of DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance of the EMIF IP and memory parts attached to it. Cc: Rajendra Nayak <redacted> Cc: Benoit Cousson <redacted> Signed-off-by: Aneesh V <redacted> --- .../bindings/memory-controllers/ti/emif.txt | 64 ++++++++++++++++++++ 1 files changed, 64 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
new file mode 100644
index 0000000..03de3e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt@@ -0,0 +1,64 @@ +* EMIF family of TI SDRAM controllers + +EMIF - External Memory Interface - is an SDRAM controller used in +TI SoCs. EMIF supports, based on the IP revision, one or more of +DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance +of the EMIF IP and memory parts attached to it. + +Required properties: +- compatible : One or more of "ti,emif-ddr2", "ti,emif-ddr3", and + "ti,emif-lpddr2" + + "ti,emif-ddr2" should be listed of the EMIF controller on this SoC + supports DDR2 memories + + "ti,emif-ddr3" should be listed of the EMIF controller on this SoC + supports DDR3 memories + + "ti,emif-lpddr2" should be listed of the EMIF controller on this SoC + supports LPDDR2 memories + +- ti,hwmods : For TI hwmods processing and omap device creation + the value shall be "emif<n>" where <n> is the number of the EMIF + instance with base 1. + +- phy-type : string indicating the phy type. Should be one of the + following: + + "phy-type-omap4" : PHY used in OMAP4 family of SoCs + + "phy-type-dm81xx" : PHY used in DM81XX family of SoCs + +- ddr-handle : phandle to a "ddr" node representing the memory part + attached to this EMIF instance. + +Optional properties: +- cs1-used : Have this property if CS1 of this EMIF + instance has a memory part attached to it. If there is a memory + part attached to CS1, it should be the same type as the one on CS0, + so there is no need to give the details of this memory part. + +- cal-resistor-per-cs : Have this property if the board has one + calibration resistor per chip-select. + +- hw-caps-read-idle-ctrl: Have this property if the controller + supports read idle window programming + +- hw-caps-ll-interface : Have this property if the controller + has a low latency interface and corresponding interrupt events + +- hw-caps-temp-alert : Have this property if the controller + has capability for generating SDRAM temperature alerts + +Example: + +emif1: emif@0x4c000000 { + compatible = "ti,emif-lpddr2"; + ti,hwmods = "emif2"; + phy-type = "phy-type-omap4"; + ddr-handle = <&elpida_2GS4>; + cs1-used; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; +};
--
1.7.1