RE: [RFC 5/5] [powerpc] Implement a p1010rdb clock source.

-----Original Message-----
From: Marc Kleine-Budde [mailto:mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org]
Sent: Tuesday, August 09, 2011 6:21 PM
To: U Bhaskar-B22300
Cc: Wolfgang Grandegger; socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org;
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source.

Bhaskar,

On 08/09/2011 02:41 PM, U Bhaskar-B22300 wrote:

quoted

quoted

The frequency is fixed to CCB-frequency / 2. Will that ever change?
What can we expect from future Flexcan hardware? Will it support
further clock sources?

[Bhaskar] Yes the frequency will always be CCB-frequency/2.Even if the

CCB gets changed that will be taken care by the u-boot fixup code for

quoted

	clock-frequency. clock-frequency is not filled by somebody in the

dts file. It will be done by u-boot.

quoted

	For clock source,I can't say right now, that's why I have kept a

property for this in the can node. So that in future, we need to fill it

quoted

	appropriately

are you actually following the discussion about Robin's patches? Robin
has provided patch that work without the clock frequency in the DT at
all..

[Bhaskar] Hi Marc,
	Yes I am following the discussion on Robin's patch. Just going tru the patches. I will respond

Marc

--
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |