[PATCH v2 3/3] gpio/mxc: add device tree probe support
From: Shawn Guo <hidden>
Date: 2011-07-05 15:19:26
Also in:
linux-arm-kernel
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The patch adds device tree probe support for gpio-mxc driver. Signed-off-by: Shawn Guo <redacted> Cc: Grant Likely <redacted> --- .../devicetree/bindings/gpio/fsl-imx-gpio.txt | 22 ++++++++++++++++++++ drivers/gpio/gpio-mxc.c | 18 +++++++++++++++- 2 files changed, 39 insertions(+), 1 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
new file mode 100644
index 0000000..4363ae4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt@@ -0,0 +1,22 @@ +* Freescale i.MX/MXC GPIO controller + +Required properties: +- compatible : Should be "fsl,<soc>-gpio" +- reg : Address and length of the register set for the device +- interrupts : Should be the port interrupt shared by all 32 pins, if + one number. If two numbers, the first one is the interrupt shared + by low 16 pins and the second one is for high 16 pins. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). + +Example: + +gpio0: gpio@73f84000 { + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f84000 0x4000>; + interrupts = <50 51>; + gpio-controller; + #gpio-cells = <2>; +};
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 4875690..059d44a 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c@@ -27,6 +27,8 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/basic_mmio_gpio.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm-generic/bug.h> enum mxc_gpio_hwtype {
@@ -126,6 +128,13 @@ static struct platform_device_id mxc_gpio_devtype[] = { } }; +static const struct of_device_id mxc_gpio_dt_ids[] = { + { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], }, + { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX2_GPIO], }, + { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX_GPIO], }, + { /* sentinel */ } +}; + /* * MX2 has one interrupt *for all* gpio ports. The list is used * to save the references to all ports, so that mx2_gpio_irq_handler
@@ -308,7 +317,13 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port) static void __devinit mxc_gpio_get_hw(struct platform_device *pdev) { - enum mxc_gpio_hwtype hwtype = pdev->id_entry->driver_data; + const struct of_device_id *of_id = + of_match_device(mxc_gpio_dt_ids, &pdev->dev); + enum mxc_gpio_hwtype hwtype; + + if (of_id) + pdev->id_entry = of_id->data; + hwtype = pdev->id_entry->driver_data; if (mxc_gpio_hwtype) { /*
@@ -426,6 +441,7 @@ static struct platform_driver mxc_gpio_driver = { .driver = { .name = "gpio-mxc", .owner = THIS_MODULE, + .of_match_table = mxc_gpio_dt_ids, }, .probe = mxc_gpio_probe, .id_table = mxc_gpio_devtype,
--
1.7.4.1