[RFC PATCH 4/5] OMAP4: Panda: Update panda board file to use DT

@@ -22,12 +22,15 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/leds.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>

@@ -410,6 +413,7 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
 static int __init omap4_panda_i2c_init(void)
 {
 	omap4_pmic_init("twl6030", &omap4_panda_twldata);
+#if !defined(CONFIG_OF)
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP

@@ -418,6 +422,7 @@ static int __init omap4_panda_i2c_init(void)
 	omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
 					ARRAY_SIZE(panda_i2c_eeprom));
 	omap_register_i2c_bus(4, 400, NULL, 0);
+#endif
 	return 0;
 }
 

@@ -681,9 +686,25 @@ void omap4_panda_display_init(void)
 	omap_display_init(&omap4_panda_dss_data);
 }
 
+static struct of_device_id omap_dt_gic_match[] __initdata = {
+	{ .compatible = "ti,omap-gic", },
+	{}
+};
+
+static struct of_device_id omap_dt_match_table[] __initdata = {
+	{ .compatible = "ti,omap4-panda", },
+	{}
+};
+
 static void __init omap4_panda_init(void)
 {
 	int package = OMAP_PACKAGE_CBS;
+	struct device_node *node;
+
+	node = of_find_matching_node_by_address(NULL, omap_dt_gic_match,
+						OMAP44XX_GIC_DIST_BASE);
+	if (node)
+		irq_domain_add_simple(node, 0);
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		package = OMAP_PACKAGE_CBL;

@@ -700,6 +721,7 @@ static void __init omap4_panda_init(void)
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
+	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
 }
 
 static void __init omap4_panda_map_io(void)