On 02/07/2011 03:45 PM, Benjamin Herrenschmidt wrote:

quoted

In my previous reply I said that "it is not so much as a need as it is a
potential simplification."  After further reflection, I don't think that
is completely true.  As we get into AMP systems with higher core counts,
then implementing this functionality using the existing
"protected-sources" implementation versus the new "pic-no-reset" work is
going to be harder to maintain.

I'm not arguing that your approach isn't more suitable for AMP systems,
I just want to leave the existing protected-sources mechanism alone. I'm
not opposing adding a new, better, mechanism for newer platforms.

Is the mechanism mentioned earlier of having "protected-sources" as a 
synonym for "pic-no-reset" not suitable?  Or would you like the current 
protected sources implementation left completely intact?

However, I'd name it differently. "pic-no-reset" doesn't carry enough
meaning in that case. What we want to point out here is that the PIC
has been pre-initialized.

Another option, which may be cleaner, is to stick to "no-reset" (no need
for pic- prefix) and make it do just that (prevent the reset), and then

It originally was "no-reset", but that was considered too broad. [1] :)

use a positive variant of "protected-sources", call it
"allowed-sources". Maybe even make it a series of ranges. Then have the
MPIC only access these.

That would work, but I still don't like having to mention this 
information twice in the device tree.  All the sources encoded in the 
various "interrupts" properties _are_ the allowed sources, right?

I think this is more robust as it would also prevent "accidental" use of
the wrong sources (bad device-tree, drivers that let you muck around
with irq numbers, etc...).

That would be nice.  All though, it may not be as helpful as it sounds. 
  There is as much of a risk that someone will botch the 
"allowed-sources" property as there is they will botch the "interrupts" 
property.  We could perhaps still preform these checks without the extra 
property: if a source is not mentioned in an interrupts property, then 
it is not allowed.

Cheers,
Ben.

[1] http://lists.ozlabs.org/pipermail/linuxppc-dev/2011-February/088244.html

-- 
Meador Inge     | meador_inge AT mentor.com
Mentor Embedded | http://www.mentor.com/embedded-software