Re: [PATCH] ndfc driver
From: Stefan Roese <sr@denx.de>
Date: 2008-12-09 06:10:27
Also in:
linuxppc-dev
Possibly related (same subject, not in this thread)
- 2008-12-17 · Re: [PATCH] ndfc driver · Josh Boyer <hidden>
- 2008-12-17 · Re: [PATCH] ndfc driver · Sean MacLennan <hidden>
On Tuesday 09 December 2008, Sean MacLennan wrote:
quoted hunk ↗ jump to hunk
On Thu, 4 Dec 2008 09:01:07 -0500 "Josh Boyer" [off-list ref] wrote:quoted
In addition to an example DTS patch (probably to warp itself), could you briefly write up a binding and put it in Documentation/powerpc/dts-bindings/amcc (or similar)? Also please CC the devicetree-discuss list on that part.Here is a start at the doc. I have sent it as a patch, but could just as easily send raw text. The example comes from the warp dts, just with less partitions, so I have not included a warp dts patch here. Cheers, Seandiff --git a/Documentation/powerpc/dts-bindings/amcc/ndfc.txtb/Documentation/powerpc/dts-bindings/amcc/ndfc.txt new file mode 100644 index 0000000..668f4a9--- /dev/null +++ b/Documentation/powerpc/dts-bindings/amcc/ndfc.txt@@ -0,0 +1,31 @@ +AMCC NDFC (NanD Flash Controller) + +Required properties: +- compatible : "amcc,ndfc".
The 4xx NAND controller was first implemented on the 440EP, IIRC. So I'm pretty sure that this controller is an IBM core and not am AMCC core. So this should be "ibm,ndfc". And with this change it makes no sense to put this file "ndfc.txt" into the amcc directory. Josh, where should this go then? Best regards, Stefan