D David Gibson #
Message details and related content
On Thu, Jul 31, 2008 at 04:58:34PM -0400, Jon Smirl wrote:
On 7/31/08, Grant Likely [off-list ref] wrote:quoted
On Thu, Jul 31, 2008 at 04:49:49PM -0400, Jon Smirl wrote: > On 7/31/08, Grant Likely [off-list ref] wrote: > > This topic keeps coming up, so it is probably time to address it once > > and for all. > > > > When it comes to machine level support in arch/powerpc, there seems to > > me that there are two levels or machine support. > > > ...... > > > > Thoughts? > > g. > > > As part of this, how can we going to solve the problem with triggering > the load of a board specific machine/fabric driver in a generic way? That really is a separate problem. We *could* do this with a board specific powerpc machine driver, but I don't think it is the best solution. I'm still thinking that the drivers module_init() function could check the top level board model property and decide whether or not to load based on that.You're assuming the driver is compiled in. If the drivers are on initrd selection has to happen via the normal device/driver matching process. Search for a device in the alias table of the drive file.
This can still be done via the board platform code. The platform code creates a platform device which the driver can later bind to. -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson