[PATCH v2 19/45] dt-bindings: mfd: at91: Add SAM9X7 compatible string
From: Varshini Rajendran <hidden>
Date: 2023-06-23 21:11:34
Also in:
alsa-devel, dmaengine, linux-clk, linux-devicetree, linux-gpio, linux-i2c, linux-mmc, linux-pm, linux-rtc, linux-serial, linux-spi, linux-usb, linux-watchdog, lkml, netdev
Subsystem:
multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document sam9x7 DT for flexcom. Signed-off-by: Varshini Rajendran <redacted> --- Documentation/devicetree/bindings/mfd/atmel-flexcom.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
index 9d837535637b..449e0af93a13 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt@@ -5,7 +5,7 @@ controller and an USART. Only one function can be used at a time and is chosen at boot time according to the device tree. Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" +- compatible: Should be "atmel,sama5d2-flexcom" or "microchip,sam9x7-flexcom" - reg: Should be the offset/length value for Flexcom dedicated I/O registers (without USART, TWI or SPI registers). - clocks: Should be the Flexcom peripheral clock from PMC.
--
2.25.1