Caught this when looking at alpha-pll code. Untested but it is clear that
this was intended to write to PLL_CAL_L_VAL and not PLL_ALPHA_VAL.

Fixes: 691865bad627 ("clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration")
Signed-off-by: Jonathan Marek <redacted>
---
  drivers/clk/qcom/clk-alpha-pll.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 94b53c7db2f7f..eaedcceb766f9 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c

@@ -1255,7 +1255,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
  		return ret;
  
  	/* Setup PLL for calibration frequency */
-	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), cal_l);
+	regmap_write(pll->clkr.regmap, PLL_CAL_L_VAL(pll), cal_l);
  
  	/* Bringup the PLL at calibration frequency */
  	ret = clk_alpha_pll_enable(hw);