Re: [PATCH v2 0/5] clk: meson: Fix GXBB and GXL/GXM GP0 PLL

Hi Neil,

Quoting Neil Armstrong (2017-03-22 03:32:22)

This patchset fixes support for the Amlogic GXBB then GXL/GXM embedded GP=

0 PLL.

=

The current support is done via a very generic interface where only the
N/M/OD parameters are changed in the control registers.
=

But unlike the Fixed PLL, this PLL is not initialized by the bootloader or
firmware, and needs some parameters to initialize and lock correctly.
=

This patchset also adds the GXL variant compatible string which is already
supported by the GXL and GXM DT nodes.
=

Changes since v1 at [1]:
 - Rebase on the Mali clocks patchset at [2]
 - also depends on v2 Audio Clocks patchset from Jerome Brunet at [3]
 - Add match table and separate tables for gxl
 - Switch to probe function to use match table data only
 - Rename unreset_for_lock to clear_reset_for_lock

Thanks for the quick changes. Applied to clk-meson, a stable branch,
which was merged into clk-next.

Best regards,
Mike

=

[1] http://lkml.kernel.org/r/1489411604-18700-1-git-send-email-narmstrong=

@baylibre.com

[2] http://lkml.kernel.org/r/1490177935-9646-1-git-send-email-narmstrong@=

baylibre.com

[3] http://lkml.kernel.org/r/20170309104154.28295-1-jbrunet@baylibre.com
=

Neil Armstrong (5):
  clk: meson: Add support for parameters for specific PLLs
  clk: meson-gxbb: Add GP0 PLL init parameters
  clk: meson-gxbb: Add GXL/GXM GP0 Variant
  clk: meson-gxbb: Expose GP0 dt-bindings clock id
  dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
=

 .../bindings/clock/amlogic,gxbb-clkc.txt           |   3 +-
 drivers/clk/meson/clk-pll.c                        |  53 +++-
 drivers/clk/meson/clkc.h                           |  23 ++
 drivers/clk/meson/gxbb.c                           | 314 +++++++++++++++=

++++--

 drivers/clk/meson/gxbb.h                           |   4 +-
 include/dt-bindings/clock/gxbb-clkc.h              |   1 +
 6 files changed, 366 insertions(+), 32 deletions(-)
=

-- =

1.9.1
=20