On 16.11.2021 09:11:40, Jarkko Nikula wrote:

quoted

ip link set can0 type can bitrate 1000000 dbitrate 2000000 fd on

I got confirmation the clock to CAN controller is indeed changed from 100
MHz to 200 MHz in release HW & firmware.

I haven't upgraded the FW in a while on our HW so that perhaps explain
why I was seeing expected rate :-)

Can we query the FW version in the driver and set the clock rate
accordingly?

So which one is more appropriate:

Acked-by: Jarkko Nikula <redacted>
or
Reviewed-by: Jarkko Nikula <redacted>

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |