Il 01/03/2021 12:36 Marc Kleine-Budde [off-list ref] ha scritto:

 
On 28.02.2021 11:35:31, Dario Binacchi wrote:

quoted

quoted

On 25.02.2021 22:51:52, Dario Binacchi wrote:

quoted

According to commit 640916db2bf7 ("can: c_can: Make it SMP safe") let RX use
IF1 (i.e. IF_RX) and TX use IF2 (i.e. IF_TX).

Is this a fix?

I think that If I consider what is described in the 640916db2bf7
commit, using the IF_RX interface in a tx routine is wrong.

Yes, IF_RX is used in c_can_do_tx(), but that's called from
c_can_poll(), which runs ins NAPI.

Yes, you are right. I was misled by the name of the function.

As far as I understand 640916db2bf7 ("can: c_can: Make it SMP safe")
fixes the race condition that c_can_poll() and c_can_start_xmit() both
access the same IF. See again the patch description:

| The hardware has two message control interfaces, but the code only uses the
| first one. So on SMP the following can be observed:
| 
| CPU0            CPU1
| rx_poll()
|   write IF1     xmit()
|                 write IF1
|   write IF1

It's not 100% accurate, as the race condition is not just
c_can_do_rx_poll() against the c_can_start_xmit(), but the whole
c_can_poll() against c_can_start_xmit().

If you think my analysis is correct, please update the patch and add a
comment to clarify why IF_RX is used instead of changing it to IF_TX.

I agree with you, I'll do it.

Thanks and regards,
Dario

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |