在 2021/1/22 下午3:22, Marc Kleine-Budde 写道:

On 1/22/21 7:22 AM, Su Yanjun wrote:

quoted

When i debug mcp2518fd, some method to track registers is
needed. This easy debug interface will be ok.

NACK

As the driver uses regmap, everything should be there already.

To read use:

| cat /sys/kernel/debug/regmap/spi0.0-crc/registers

Register write support for devices that are handles by proper kernel drivers is
a pure debugging tool, thus not enabled by default, not even with a Kconfig
switch. You have to enable it manually, have a look at commit:

09c6ecd39410 regmap: Add support for writing to regmap registers via debugfs

You're right.

Thank you

regards,
Marc