[PATCH] can: Documentation: fix spelling of sample-point
From: Robert Schwebel <hidden>
Date: 2014-03-19 08:50:41
Subsystem:
documentation, networking [general], the rest · Maintainers:
Jonathan Corbet, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Signed-off-by: Robert Schwebel <redacted> --- Documentation/networking/can.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 0cbe6ec..2fa44cb 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt@@ -1017,7 +1017,7 @@ solution for a couple of reasons: in case of a bus-off condition after the specified delay time in milliseconds. By default it's off. - "bitrate 125000 sample_point 0.875" + "bitrate 125000 sample-point 0.875" Shows the real bit-rate in bits/sec and the sample-point in the range 0.000..0.999. If the calculation of bit-timing parameters is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the
--
1.9.0