@@ -21,7 +21,6 @@ noinst_HEADERS = \
 	include/socketcan/can/error.h \
 	include/socketcan/can/gw.h \
 	include/socketcan/can.h \
-	include/socketcan/can/ioctl.h \
 	include/socketcan/can/isotp.h \
 	include/socketcan/can/netlink.h \
 	include/socketcan/can/raw.h

@@ -1,99 +0,0 @@
-
-/*
- * socketcan/can/ioctl.h
- *
- * Definitions for CAN controller setup (work in progress)
- *
- * $Id$
- *
- * Send feedback to <linux-can@vger.kernel.org>
- *
- */
-
-#ifndef CAN_IOCTL_H
-#define CAN_IOCTL_H
-
-#include <linux/sockios.h>
-
-/*
- * CAN bitrate
- */
-#define CAN_BITRATE_UNCONFIGURED	((__u32) 0xFFFFFFFFU)
-#define CAN_BITRATE_UNKNOWN		0
-#define CAN_BITRATE_DEFAULT		500000
-
-/*
- * CAN custom bit time
- */
-enum can_bittimes {
-	CAN_BITTIME_STD,
-	CAN_BITTIME_BTR
-};
-
-/* TSEG1 of controllers usually is a sum of synch_seg (always 1),
- * prop_seg and phase_seg1, TSEG2 = phase_seg2 */
-
-struct can_bittime_std {
-	__u32 brp;        /* baud rate prescaler */
-	__u8  prop_seg;   /* from 1 to 8 */
-	__u8  phase_seg1; /* from 1 to 8 */
-	__u8  phase_seg2; /* from 1 to 8 */
-	__u8  sjw:7;      /* from 1 to 4 */
-	__u8  sam:1;      /* 1 - enable triple sampling */
-};
-
-struct can_bittime_btr {
-	__u8  btr0;
-	__u8  btr1;
-};
-
-struct can_bittime {
-	enum can_bittimes type;
-	union {
-		struct can_bittime_std std;
-		struct can_bittime_btr btr;
-	};
-};
-
-/*
- * CAN mode
- */
-enum can_mode {
-	CAN_MODE_STOP = 0,
-	CAN_MODE_START,
-	CAN_MODE_SLEEP
-};
-
-/*
- * CAN controller mode
- */
-#define CAN_CTRLMODE_LOOPBACK   0x1
-#define CAN_CTRLMODE_LISTENONLY 0x2
-
-/*
- * CAN operational and error states
- */
-enum can_state {
-	CAN_STATE_ACTIVE = 0,
-	CAN_STATE_BUS_WARNING,
-	CAN_STATE_BUS_PASSIVE,
-	CAN_STATE_BUS_OFF,
-	CAN_STATE_STOPPED,
-	CAN_STATE_SLEEPING
-};
-
-/*
- * CAN device statistics
- */
-struct can_device_stats {
-	int error_warning;
-	int data_overrun;
-	int wakeup;
-	int bus_error;
-	int error_passive;
-	int arbitration_lost;
-	int restarts;
-	int bus_error_at_init;
-};
-
-#endif /* CAN_IOCTL_H */