AW: Re: Support for 0489:e031 Foxconn / Hon Hai

Hey Marcel,

quoted

Here is the output of hciconfig hci0 -a:
$ hciconfig hci0 -a
hci0:=09Type: BR/EDR  Bus: USB
=09BD Address: EC:55:F9:EA:DE:09  ACL MTU: 1021:8  SCO MTU: 64:1
=09UP RUNNING PSCAN ISCAN 
=09RX bytes:5947 acl:0 sco:0 events:198 errors:0
=09TX bytes:1986 acl:0 sco:0 commands:117 errors:0
=09Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x7b 0x87
=09Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
=09Link policy: RSWITCH HOLD SNIFF PARK 
=09Link mode: SLAVE ACCEPT 
=09Name: 'abg4858n-lnx'
=09Class: 0x4a0100
=09Service Classes: Networking, Capturing, Telephony
=09Device Class: Computer, Uncategorized
=09HCI Version: 4.0 (0x6)  Revision: 0x0
=09LMP Version: 4.0 (0x6)  Subversion: 0x2118
=09Manufacturer: Broadcom Corporation (15)

Looks ok isn't it?

Yes, and getting a nice Low-Energy capable dongle is great. Where did
you get this from? I like to get a bunch of these for testing.

It's build-in into the Lifebook E751 of Fujitsu (when ordered with Bluet=
ooth).
The product page for the E751: http://lifebook.uk.ts.fujitsu.com/Product=
s/Performance/LIFEBOOK-E751.htm
More an advertisment page ;) ... and the only thing about Bluetooth is t=
his sentence: "Ultimate connectivity with optional embedded 3G/UMTS, WLA=
N and Bluetooth=C2=AE"

quoted

But I can't add any devices. When I search for devices VERY long, I c=

an find one or two. But only devices which I can't pair with.

quoted

e.g. I never found my headset, altought it is in pairing mode when I =

start searching.

quoted

During search, hcidump -v shows only this:

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

quoted

HCI Event: Inquiry Complete (0x01) plen 1

    status 0x00

so no problem here too.

Any suggestions what I could try next? Anything which could give me i=

nformations whats going wrong here?

Maybe the antenna is kinda wrongly calibrated, but I can't tell any
details here. That is hardware specific.

So you think it's not connected correctly or what means wrongly calibrat=
ed?
Perhaps I can give it a try via Virtualbox under windows ... 

Ciao
Thilo