[Bluez-users] AMBIT T60M665 Firmware Upgrade

Hi all,

I have an internal AMBIT T60M665 Bluecore2-Ext on my laptop, and I tried to
upgrade it since it had an old version (16.4), with the genericcsr file (the
dongle is recognized as a CSR generic device), the update went fine but I
lost the blue light on the laptop so I decided to go back and tried to
downgrade, but since I din't the backup I just tried some firmware that I
supposed to be the same as mine from an epox BT-DG02A dongle (the header is
the same - "LOADER=bc02x_hci_1v1_16.4_56, STACK=bc02x_hci_1v1_16.4_56" and
the VID+PID also)
Well doing this reduced the range of my device to 1m, my bluetooth mouse
that sits on the side of the laptop has a realy bad reception. So I got an
identical laptop from work and got the firmware from it to put in mine, but
I can't do the upgrade I always get an error at the middle of the upgrade
about the device not being ready... This happens at byte 2046 if I try with
my backup but with genericcsr.dfu I get this error at byte ~ 613000.

Does anyone have a hint on how to resolve this?
I've tried this with dfu update from marcel and also with the widcomm tools
in windows...

Thanks!

--
Regards,

Nuno Cruz 



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users