[Bluez-devel] Re: Re: Re: Re: multi rfcomm/sco connection

Hi Lars,

I looked into this problem back "than", but due to a shortage of time I
never had a chance to really fix this (Marcel stated that the best thing
would be a complete rewrite of hci_usb anyway).

I have try to make change in hci_usb.c first.

There should be plenty of discussion in the mailing list archive about
how to fix the stuff and how it might be done (main problem was the
interrupt context in the notify function and the not-send urbs (queue
must be empty before setting the new alternate setting...)

By added debug code for checking interrupt context on serveral functions
in hci_usb.c, I cannot found any functions that in not in_interrupt
context except in hci_usb_probe().

Then I added ioctl() in hci_usb.c and call it from sco_connect() [sco.c]
that not in_interrupt context, it does dynamically change alternate setting
vary by sco_num but it's work only for outgoing connection. However this
solution is not recommended by Marcel previously that I used to proposed.

would be great if you could fix it, as I don't think I'll have time for
this in the next... months... :(

If you have better solution to fix it please let me known before. 

Thanks.

Regards,
Suriyan.




-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel