On Fri, Mar 07, 2025 at 04:21:58PM +0100, Mikulas Patocka wrote:

quoted

I didn't say you were. I said the concept that dm-loop is based on
is fundamentally flawed and that your benchmark setup does not
reflect real world usage of loop devices.

quoted

Where are the bug reports about the loop device being slow and the
analysis that indicates that it is unfixable?

So, I did benchmarks on an enterprise nvme drive (SAMSUNG 
MZPLJ1T6HBJR-00007). I stacked ext4/loop/ext4, xfs/loop/xfs (using losetup 
--direct-io=on), ext4/dm-loop/ext4 and xfs/dm-loop/xfs. And loop is slow.

Are you running the loop device in directio mode?  The default is to use
buffered io, which wastes pagecache /and/ sometimes trips dirty limits
throttling.  The loopdev tests in fstests get noticeably faster if I
force directio mode.

--D

synchronous I/O:
fio --direct=1 --bs=4k --runtime=10 --time_based --numjobs=12 --ioengine=psync --iodepth=1 --group_reporting=1 --filename=/mnt/test2/l -name=job --rw=rw
raw block device:
   READ: bw=399MiB/s (418MB/s), 399MiB/s-399MiB/s (418MB/s-418MB/s), io=3985MiB (4179MB), run=10001-10001msec
  WRITE: bw=399MiB/s (418MB/s), 399MiB/s-399MiB/s (418MB/s-418MB/s), io=3990MiB (4184MB), run=10001-10001msec
ext4/loop/ext4:
   READ: bw=223MiB/s (234MB/s), 223MiB/s-223MiB/s (234MB/s-234MB/s), io=2232MiB (2341MB), run=10002-10002msec
  WRITE: bw=223MiB/s (234MB/s), 223MiB/s-223MiB/s (234MB/s-234MB/s), io=2231MiB (2339MB), run=10002-10002msec
xfs/loop/xfs:
   READ: bw=220MiB/s (230MB/s), 220MiB/s-220MiB/s (230MB/s-230MB/s), io=2196MiB (2303MB), run=10001-10001msec
  WRITE: bw=219MiB/s (230MB/s), 219MiB/s-219MiB/s (230MB/s-230MB/s), io=2193MiB (2300MB), run=10001-10001msec
ext4/dm-loop/ext4:
   READ: bw=338MiB/s (355MB/s), 338MiB/s-338MiB/s (355MB/s-355MB/s), io=3383MiB (3547MB), run=10002-10002msec
  WRITE: bw=338MiB/s (355MB/s), 338MiB/s-338MiB/s (355MB/s-355MB/s), io=3385MiB (3549MB), run=10002-10002msec
xfs/dm-loop/xfs:
   READ: bw=375MiB/s (393MB/s), 375MiB/s-375MiB/s (393MB/s-393MB/s), io=3752MiB (3934MB), run=10002-10002msec
  WRITE: bw=376MiB/s (394MB/s), 376MiB/s-376MiB/s (394MB/s-394MB/s), io=3756MiB (3938MB), run=10002-10002msec

asynchronous I/O:
fio --direct=1 --bs=4k --runtime=10 --time_based --numjobs=12 --ioengine=libaio --iodepth=16 --group_reporting=1 --filename=/mnt/test2/l -name=job --rw=rw
raw block device:
   READ: bw=1246MiB/s (1306MB/s), 1246MiB/s-1246MiB/s (1306MB/s-1306MB/s), io=12.2GiB (13.1GB), run=10001-10001msec
  WRITE: bw=1247MiB/s (1308MB/s), 1247MiB/s-1247MiB/s (1308MB/s-1308MB/s), io=12.2GiB (13.1GB), run=10001-10001msec
ext4/loop/ext4:
   READ: bw=274MiB/s (288MB/s), 274MiB/s-274MiB/s (288MB/s-288MB/s), io=2743MiB (2877MB), run=10001-10001msec
  WRITE: bw=275MiB/s (288MB/s), 275MiB/s-275MiB/s (288MB/s-288MB/s), io=2747MiB (2880MB), run=10001-10001msec
xfs/loop/xfs:
   READ: bw=276MiB/s (289MB/s), 276MiB/s-276MiB/s (289MB/s-289MB/s), io=2761MiB (2896MB), run=10002-10002msec
  WRITE: bw=276MiB/s (290MB/s), 276MiB/s-276MiB/s (290MB/s-290MB/s), io=2765MiB (2899MB), run=10002-10002msec
ext4/dm-loop/ext4:
   READ: bw=1189MiB/s (1247MB/s), 1189MiB/s-1189MiB/s (1247MB/s-1247MB/s), io=11.6GiB (12.5GB), run=10002-10002msec
  WRITE: bw=1190MiB/s (1248MB/s), 1190MiB/s-1190MiB/s (1248MB/s-1248MB/s), io=11.6GiB (12.5GB), run=10002-10002msec
xfs/dm-loop/xfs:
   READ: bw=1209MiB/s (1268MB/s), 1209MiB/s-1209MiB/s (1268MB/s-1268MB/s), io=11.8GiB (12.7GB), run=10001-10001msec
  WRITE: bw=1210MiB/s (1269MB/s), 1210MiB/s-1210MiB/s (1269MB/s-1269MB/s), io=11.8GiB (12.7GB), run=10001-10001msec

Mikulas