在 2020/1/17 22:18, Josef Bacik 写道:

On 1/17/20 6:50 AM, Sun Ke wrote:

quoted

Connect and disconnect a nbd device repeatedly, will cause
NULL pointer fault.

It will appear by the steps:
1. Connect the nbd device and disconnect it, but now nbd device
    is not disconnected totally.
2. Connect the same nbd device again immediately, it will fail
    in nbd_start_device with a EBUSY return value.
3. Wait a second to make sure the last config_refs is reduced
    and run nbd_config_put to disconnect the nbd device totally.
4. Start another process to open the nbd_device, config_refs
    will increase and at the same time disconnect it.

To fix it, add a NBD_HAS_STARTED flag. Set it in nbd_start_device_ioctl
and nbd_genl_connect if nbd device is started successfully.
Clear it in nbd_config_put. Test it in nbd_genl_disconnect and
nbd_genl_reconfigure.

I don't doubt what you are seeing, but what exactly are we NULL pointer 
dereferencing?  I can't quite figure it out from the steps.

The root case is when do disconnect, pointers in structure nbd_device 
will not be free immeditily, it should wait for the last config_refs to 
be decreased.

I got this kernel NULL pointer dereference report:

[  256.454582] Dev nbd0: unable to read RDB block 0
[  256.455611] Dev nbd0: unable to read RDB block 0
[  256.457528] Dev nbd0: unable to read RDB block 0
[  256.458742] Dev nbd0: unable to read RDB block 0
[  256.516375] Dev nbd0: unable to read RDB block 0
[  257.468970] BUG: kernel NULL pointer dereference, address: 
0000000000000020
[  257.469645] #PF: supervisor write access in kernel mode
[  257.470445] #PF: error_code(0x0002) - not-present page
[  257.470888] PGD 12ecb7067 P4D 12ecb7067 PUD 12f3f2067 PMD 0
[  257.471384] Oops: 0002 [#1] SMP
[  257.471671] CPU: 1 PID: 1651 Comm: nbd-client Not tainted 
5.5.0-rc5-00039-gae6088216ce4 #22
[  257.472501] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), 
BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014
[  257.473776] RIP: 0010:mutex_lock+0x29/0x60
[  257.474593] Code: 00 0f 1f 44 00 00 53 48 89 fb 48 83 05 cf f8 01 02 
01 e8 ea bd ff ff 48 83 05 ca f8 01 02 01 31 c0 65 48 8b 14 25 00 7d 01 
00 <f0> 48 0f b1 13 74 f
[  257.476221] RSP: 0018:ffffc900004cfa10 EFLAGS: 00010246
[  257.476670] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 
0000000000000000
[  257.477289] RDX: ffff88812f524a00 RSI: ffffffff82e44212 RDI: 
0000000000000020
[  257.477999] RBP: ffffc900004cfab0 R08: ffff88813bc6c110 R09: 
0000000000000000
[  257.478617] R10: 8080808080808080 R11: 0000000000000018 R12: 
ffff88813584b000
[  257.479228] R13: ffffffff838b1f00 R14: ffffc900004cfbb8 R15: 
ffffc900004cfa40
[  257.479871] FS:  00007f0c30d75b40(0000) GS:ffff88813bc40000(0000) 
knlGS:0000000000000000
[  257.480569] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  257.481336] CR2: 0000000000000020 CR3: 000000012f5ea000 CR4: 
00000000000006e0
[  257.481980] Call Trace:
[  257.482262]  flush_workqueue+0x91/0x690
[  257.482627]  ? nbd_size_update+0x180/0x180 [nbd]
[  257.483063]  nbd_disconnect_and_put+0x80/0xd0 [nbd]
[  257.483497]  nbd_genl_disconnect+0x153/0x2d0 [nbd]
[  257.483969]  genl_rcv_msg+0x2ab/0x620
[  257.484302]  ? netlink_unicast+0x3b8/0x5e0
[  257.484663]  ? __nlmsg_put+0x78/0x90
[  257.485009]  ? genl_family_rcv_msg_attrs_parse+0x1a0/0x1a0
[  257.485488]  netlink_rcv_skb+0x5a/0x1a0
[  257.485849]  genl_rcv+0x34/0x60
[  257.486129]  netlink_unicast+0x2a4/0x5e0
[  257.486468]  netlink_sendmsg+0x369/0x6b0
[  257.486854]  ? rw_copy_check_uvector+0x50/0x1d0
[  257.487257]  ____sys_sendmsg+0x1f7/0x370
[  257.487604]  ? copy_msghdr_from_user+0xff/0x1e0
[  257.488016]  ___sys_sendmsg+0x8c/0xe0
[  257.488335]  ? copy_msghdr_from_user+0xff/0x1e0
[  257.488730]  ? ___sys_recvmsg+0xa1/0xe0
[  257.489091]  ? handle_mm_fault+0x199/0x390
[  257.489454]  __sys_sendmsg+0x6b/0xe0
[  257.489766]  __x64_sys_sendmsg+0x23/0x30
[  257.490149]  do_syscall_64+0xab/0x410
[  257.490474]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  257.490942] RIP: 0033:0x7f0c3047cb87
[  257.491288] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 
00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 
05 <48> 3d 00 f0 ff ff 8
[  257.492940] RSP: 002b:00007ffefb59db28 EFLAGS: 00000246 ORIG_RAX: 
000000000000002e
[  257.493627] RAX: ffffffffffffffda RBX: 00000000023b0120 RCX: 
00007f0c3047cb87
[  257.494497] RDX: 0000000000000000 RSI: 00007ffefb59db60 RDI: 
0000000000000003
[  257.495116] RBP: 00000000023b01f0 R08: 0000000000000014 R09: 
0000000000000002
[  257.495731] R10: 0000000000000006 R11: 0000000000000246 R12: 
00000000023b0030
[  257.496356] R13: 00007ffefb59db60 R14: 0000000000000001 R15: 
00000000ffffffff
[  257.496989] Modules linked in: nbd
[  257.497580] CR2: 0000000000000020

Thanks,

Ke

quoted

Signed-off-by: Sun Ke <redacted>
---
  drivers/block/nbd.c | 21 +++++++++++++++++++++
  1 file changed, 21 insertions(+)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index b4607dd96185..ddd364e208ab 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c

@@ -83,6 +83,7 @@ struct link_dead_args {

  #define NBD_DESTROY_ON_DISCONNECT    0
  #define NBD_DISCONNECT_REQUESTED    1
+#define NBD_HAS_STARTED                2
  struct nbd_config {
      u32 flags;

@@ -1215,6 +1216,7 @@ static void nbd_config_put(struct nbd_device *nbd)

          nbd->disk->queue->limits.discard_alignment = 0;
          blk_queue_max_discard_sectors(nbd->disk->queue, UINT_MAX);
          blk_queue_flag_clear(QUEUE_FLAG_DISCARD, nbd->disk->queue);
+        clear_bit(NBD_HAS_STARTED, &nbd->flags);
          mutex_unlock(&nbd->config_lock);
          nbd_put(nbd);

@@ -1290,6 +1292,8 @@ static int nbd_start_device_ioctl(struct 

nbd_device *nbd, struct block_device *b
      ret = nbd_start_device(nbd);
      if (ret)
          return ret;
+    else
+        set_bit(NBD_HAS_STARTED, &nbd->flags);

The else is superfluous here.  Thanks,

Josef

.