On Tue, Jul 03, 2018 at 12:49:13PM -0700, Omar Sandoval wrote:

On Fri, Jun 29, 2018 at 09:13:53AM -0700, Bart Van Assche wrote:

quoted

On 06/28/18 16:43, Omar Sandoval wrote:

quoted

On Wed, Jun 27, 2018 at 02:49:08PM -0700, Bart Van Assche wrote:
[ ... ]
srp/002 (File I/O on top of multipath concurrently with logout and login (mq)) [failed]
runtime  6.680s  ...  6.640s
     --- tests/srp/002.out       2018-06-28 15:18:36.537169282 -0700
     +++ results/nodev/srp/002.out.bad   2018-06-28 16:21:59.930603931 -0700
     @@ -3,5 +3,4 @@
      Unloaded the rdma_rxe kernel module
      Configured SRP target driver
      Unloaded the ib_srp kernel module
     -Unloaded the ib_srpt kernel module
     -Unloaded the rdma_rxe kernel module
     +/dev/disk/by-id/dm-uuid-mpath-3600140572616d6469736b31000000000: not found

And everything else fails like srp/002.

I think that indicates a problem with the multipathing software on your
setup. Was multipathd running? Had the proper multipath configuration
(/etc/multipath.conf) been provided? Was multipathing enabled in the kernel
config?

Ah, the README says /etc/multipathd.conf. Fixing it to multipath.conf
didn't work, either, though.

Hit send too early. multipathd is running, but I did find this in my
dmesg:

[ 1844.347561] multipath[6558]: segfault at 100 ip 00007fbb7cda51e6 sp 00007fffe9241798 error 4 in libc-2.27.so[7fbb7cd0e000+1b3000]

I'll look into that.