K Kent Overstreet #
Message details and related content
On Thu, Aug 16, 2012 at 10:07:29PM +1000, Joseph Glanville wrote:
There also seems to have been pretty severe performance regressions in cache bypassed sequential I/O. The newer code barely does 70mb/s sequential writes when sequential_cuttoff is set to 4M however it does around 300mb/s when set to 0 (no bypass) with dd and 1M block size. When using the older codebase the cache bypass is actually slightly faster than going to cache at around 360mb/s but this is still much slower than the underlying block devices (as previously discussed).
Ouch. Can you try profiling it with perf while running dd? perf record -afg dd etc. etc. perf report should do it