[PATCH v3 19/27] spi: spi-mem: Create macros for DTR operation
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: 2025-01-10 14:45:55
Also in:
imx, linux-arm-kernel, linux-mediatek, linux-riscv, linux-rockchip, linux-spi, lkml
Subsystem:
spi subsystem, the rest · Maintainers:
Mark Brown, Linus Torvalds
We do have macros for defining command, address, dummy and data cycles. We also have a .dtr flag that implies sampling the bus on both edges, but there are currently no macros enabling it. We might make use of such macros, so let's create: - SPI_MEM_DTR_OP_CMD - SPI_MEM_DTR_OP_ADDR - SPI_MEM_DTR_OP_DUMMY - SPI_MEM_DTR_OP_DATA_OUT - SPI_MEM_DTR_OP_DATA_OUT Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- include/linux/spi/spi-mem.h | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index ca6ea01c40f85095ac2730cb424cfb21d7daa700..306c05dd13789017da2c5339cddc031f03302bb9 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h@@ -20,6 +20,14 @@ .opcode = __opcode, \ } +#define SPI_MEM_DTR_OP_CMD(__opcode, __buswidth) \ + { \ + .nbytes = 1, \ + .opcode = __opcode, \ + .buswidth = __buswidth, \ + .dtr = true, \ + } + #define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \ { \ .nbytes = __nbytes, \
@@ -27,6 +35,14 @@ .val = __val, \ } +#define SPI_MEM_DTR_OP_ADDR(__nbytes, __val, __buswidth) \ + { \ + .nbytes = __nbytes, \ + .val = __val, \ + .buswidth = __buswidth, \ + .dtr = true, \ + } + #define SPI_MEM_OP_NO_ADDR { } #define SPI_MEM_OP_DUMMY(__nbytes, __buswidth) \
@@ -35,6 +51,13 @@ .buswidth = __buswidth, \ } +#define SPI_MEM_DTR_OP_DUMMY(__nbytes, __buswidth) \ + { \ + .nbytes = __nbytes, \ + .buswidth = __buswidth, \ + .dtr = true, \ + } + #define SPI_MEM_OP_NO_DUMMY { } #define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth) \
@@ -45,6 +68,15 @@ .buf.in = __buf, \ } +#define SPI_MEM_DTR_OP_DATA_IN(__nbytes, __buf, __buswidth) \ + { \ + .dir = SPI_MEM_DATA_IN, \ + .nbytes = __nbytes, \ + .buf.in = __buf, \ + .buswidth = __buswidth, \ + .dtr = true, \ + } + #define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth) \ { \ .buswidth = __buswidth, \
@@ -53,6 +85,15 @@ .buf.out = __buf, \ } +#define SPI_MEM_DTR_OP_DATA_OUT(__nbytes, __buf, __buswidth) \ + { \ + .dir = SPI_MEM_DATA_OUT, \ + .nbytes = __nbytes, \ + .buf.out = __buf, \ + .buswidth = __buswidth, \ + .dtr = true, \ + } + #define SPI_MEM_OP_NO_DATA { } /**
--
2.47.0