[PATCH] ARM: dts: aspeed: Everest PSU #3 address change

On Mon, 21 Jun 2021 at 19:09, Eddie James [off-list ref] wrote:

On Thu, 2021-06-10 at 20:29 +0000, Brandon Wyman wrote:

quoted

From: "B. J. Wyman" <redacted>

The third power supply had an I2C address conflict with another
device
in the system. The device will have the address changed from 6Ah to
6Dh.

Thanks Brandon.

Reviewed-by: Eddie James <eajames@linux.ibm.com>

I've applied this to dev-5.10.

I'll try to remember to get the change upstream too.

quoted

Signed-off-by: B. J. Wyman <redacted>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts

b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 3295c8c7c05c..480cb6604c7d 100644

--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts

@@ -536,9 +536,9 @@ power-supply at 69 {
              reg = <0x69>;
      };

-     power-supply at 6a {
+     power-supply at 6d {
              compatible = "ibm,cffps";
-             reg = <0x6a>;
+             reg = <0x6d>;
      };

      power-supply at 6b {