[PATCH v2 1/2] dt-bindings: mmc: Document Aspeed SD controller

The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
data bus if only a single slot is enabled.

Signed-off-by: Andrew Jeffery <redacted>
---
In v2:

* Rename to aspeed,sdhci.yaml
* Rename sd-controller compatible
* Add `maxItems: 1` for reg properties
* Move sdhci subnode description to patternProperties
* Drop sdhci compatible requirement
* #address-cells and #size-cells are required
* Prevent additional properties
* Implement explicit ranges in example
* Remove slot property

 .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml

diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
new file mode 100644
index 000000000000..67a691c3348c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED SD/SDIO/eMMC Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Ryan Chen <ryanchen.aspeed@gmail.com>
+
+description: |+
+  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
+  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
+  only a single slot is enabled.
+
+  The two slots are supported by a common configuration area. As the SDHCIs for
+  the slots are dependent on the common configuration area, they are described
+  as child nodes.
+
+properties:
+  compatible:
+    enum: [ aspeed,ast2400-sd-controller, aspeed,ast2500-sd-controller ]